VICTORY VF TKO HUNTING ARROW The VF TKO is the ultimate standard diameter hunting arrow. The 100% all carbon shaft incorporates MaxxKe™ Technology increasing kinetic energy during impact and allowing for faster arrow recovery in flight. These arrows are accurate, extremely durable, and have the most consistent spine uniformity of any arrow we sell. Features 100% Carbon Fiber for Strength and Durability Spine Aligned for Increased Accuracy and Tighter Grouping 100% Hand Fletched

Read more less

If you are looking for maximum kinetic energy, coupled with unmatched penetration, then the VAP TKO is the right arrow choice. Featuring MaxxKe Technology, the outer layer of carbon fiber is oriented at ±45° direction to reduce the twisting force imparted on the arrow during launch. This reduction in torsional deflection greatly increases kinetic energy and accuracy. The VAP TKO offers the same legendary speed and accuracy of the original VAP with a higher grain weight for maximum killing power. The VAP TKO looks like no other arrow on the market because it performs like no other arrow on the market. Included SHOK broadhead adaptor is made of 7075 aluminum alloy provides impact protection for maximum impact strength and durability. The SHOK adaptor fits 8/32" broadheads. Features 100% Carbon Fiber for Strength and Durability Micro Outer Diameter for Maximum Speed and Penetration Nano Ceramic "ICE" Coating Improves Penetration/Allows Easy Target Removal 7075 Precision Components Spine Aligned for Increased Accuracy and Tighter Grouping 100% Hand Fletched

Read more less

VICTORY VAP-SS MICRO-DIAMETER HUNTING ARROW We are thrilled to release the pinnacle of hunting arrow technology; a bone-crushing, microdiameter shaft with stainless steel layers infused into a 90° carbon fiber weave, the VAP-SS is lighter and faster than its predecessor, the Xtorsion™. With higher FOC and the same sledge-hammering momentum, this shaft will punch through anything in its path and is sure to stay straight shot after shot. Included SHOK broadhead adaptor is made of 7075 aluminum alloy provides impact protection for maximum impact strength and durability. The SHOK adaptor fits 8/32" broadheads. Features 100% Carbon Fiber for Strength and Durability Micro Outer Diameter for Maximum Speed and Penetration Nano Ceramic "ICE" Coating Improves Penetration/Allows Easy Target Removal 7075 Precision Components Spine Aligned for Increased Accuracy and Tighter Grouping 100% Hand Fletched

Read more less

MICRO DIAMETER ARROW The VAP JR is offered in a .165 micro diameter and available in three of the most popular youth spines.  For those junior archers that want to take their skills to the next level and shoot further distances, the VAP JR is the perfect choice.  These arrows are 100% all carbon and custom hand fletched, with precision target points included. Pre fletched with 2" Raptor Vanes. 

Read more less

The VForce™ arrow has defined the industry standard for high quality hunting arrows since day one. Highly advanced carbon engineering helped to craft this 100% all carbon shaft with incredible consistency and durability. If you want one of the toughest, most dependable hunting shafts on the market, then the VForce™ is for you.  .245" Inside Arrow Diameter Included Components: RPS 22 Grain Insert FLETCHING COLORS WILL VARY BY PACK (Yellow, Green, Orange, Red...)

Read more less

Add Even More Durability And Better Visibility To Your Bowfishing Fun With The Muzzy Bowfishing Lighted Carbon Fish Arrow. Made Of A Lightweight And Durable Carbon Composite, This Tough Arrow Comes With A Muzzy Bowfishing Lighted Nock Installed For Greater Visibility On Every Shot. Tough 80% Fiberglass/20% Carbon Construction Gives This 5/16″ Arrow Maximum Durability And Improved Straightness For Longer Life And Improved Accuracy. Arrow Also Comes With A Predrilled Cross Hole For Tying Your Line Or Installing A Safety Slide. The Set’S Preinstalled Gar Or Carp Point Combines A Compact And Rugged Stainless Steel Ferrule With A Hardened Steel Trocar™ Tip On Top For Deep Penetration Through Tough Scales And Bone. Easy-To-Use Design Features Dual Barbs That Hold Tight Until You Land The Fish, Then Release Easily With 2 Simple Turns Of The Tip.

Read more less

Easton’s 4mm 8/32 Aluminum Half-Out is machined out of Aerospace 7075-T6 alloy and provides an affordable option for standard thread 8-32 broadheads and field points to be used with most of Easton’s 4mm Carbon, 4mm FMJ, and 4mm A/C shafts. Weighing 50 grains and available in 5 sizes to fit a wide range of spines, the half out utilizes a collared design at the connection point of the shaft for increased strength and a precise fit. Easton recommends that only 2-part Epoxy (No Quick Bond or any other CA adhesives) be used in order to maximize the strength and durability of the component. FEATURES:• 7075-T6 Aerospace Alloy Construction• 50 grains• Non-Reflective Black Anodize Coating• Utilizes a two-point interface for increased strength and precise fit• Sold in Dozen Bags

Read more less

SIZE 2114 – 100 Grain 2214 – 100 Grain 2312 – 100 Grain 2314 – 100 Grai 2315 – 100 Grain 2712 – 200 Grain

Read more less

Protect your arrow shafts with the 4mm pin. The 4mm pins are compatible with several target arrow shafts and Easton’s Pin™  Nocks and G Pin™ Nocks. Dozen Bag

Read more less

The great look of traditional cedar paired with technically-advanced microlaminate carbon gives this reduced diameter hunting lethal strength and more kinetic storage - capable of taking the toughest game. The proved RPS insert system and accurate H nocks combine for total hunting performance. Straightness: ±.003"H Nock – installedST RPS Inserts includedBroadhead Adapter Ring (BAR) recommended if required by broadhead designWeight (grains/inch) 10.3RPS Point (inch) 9/32

Read more less

Description Upgrade your favorite fletching jig with this anodized black 3 and 4 vane fletch nock receiver An innovative set screw within the nock receiver allows the replacement of a single vane Simply loosen the set screw and rotate the knob to clamp a properly glued vane within the jig, then tighten your set screw and rotate the 120° or 90° to the desired vane location Fork within the receiver better holds nocks to maintain consistent vanes on every arrow Constructed of anodized aluminum

Read more less

Description Archery style: Target Engineered using the same high-performance processes used in advanced tournament arrows A great value for new archers looking to progress to higher poundage bows quickly Construction: Multi-layer wrapped 100% carbon-fiber Outside diameter: 0.228”(600), 0.219”(800), 0.214”(1000), 0.211"(1200), 0.206”(1400) Inside diameter: 4mm Fletching: 2.3” Parabolic Vanes Components included: 4mm points (70 grains), Preinstalled 4mm N nocks (7 grains) Available Spine Size |  (Weight):  600 | (7.6 gpi) 800 | (6.2 gpi) 1000 | (5.4 gpi) 1200 | (5.1 gpi) 1400 | (4.2 gpi) 1600 | (3.8 gpi) 1800 | (3.6 gpi) 2000 | (3.4 gpi)

Read more less

FEATURES:  6mm ST RPS 8-32 Inserts included (18 grains) 6mm reduced-diameter higher-velocity 100% carbon-fiber construction  Factory helical fletched w/ 2” Blazer Vanes  Pre-installed 6mm H nocks (9 grains)  Straightness +/- .003” Made in USA

Read more less

Durable fiberglass arrows built with the most accurate straightness tolerances available. Meets the needs of today’s recreational and competitive bowfisherman. Product Features: Durable fiberglass arrow Accurate straightness tolerance Raw shaft In-line nock system

Read more less

Hunting accuracy for shooter confidence is the cornerstone of Easton 6.5 arrows. The 6.5 uses proprietary Acu-Carbon™Uniform Spine process. Acu-Carbon™ is a continuous-fed, single-die manufacturing method that results in the most reliable tolerances and eliminates the need for the spine-alignment and weight sorting. Easton’s Acu-Carbon™ production line produces the most consistent spine and weight from dozen to dozen and lot to lot—year in and year out. This benefits the bowhunter with truer flight and pinpoint accuracy in the field. The 6.5 will also include Microlite Nocks, which are designed to move the throat of the nock closer to the back of the arrow shaft. This makes the release more forgiving and further optimizes accuracy of the shot. Microlite nocks are 38% lighter to increase arrow velocity and add front-of-center weight forwarding to improve arrow flight. SPECIFICATIONS CB Insert pre-installed—precision machined component has four-times larger shoulder. Strengthens the broadhead/arrow interface and boosts F.O.C. (21 grains) Microlite Nocks—shortens the critical distance between the shaft and bowstring for improved alignment and reduced weight. Acu-Carbon™ Uniform Spine USA Manufacturing Process for the highest level of accuracy Bully™ Vane Fletching—stiffer material for superior control and quiet arrow flight.

Read more less