Easton’s New Vector is a 4mm 100% carbon-fiber arrow engineered using the same high-performance processes used in advanced tournament arrows, but priced for value conscious consumers, making the Vector ideal for archers who may be getting started in target archery or quickly progressing to higher poundage bows and needing to change arrow setups to match. All Vector arrows come pre-cut to length and ready-to-shoot with factory fletched 2” feathers and preinstalled nocks; making it the perfect arrow for clubs, recreational archery ranges and beginners of all ages.
Vector is available in 5 pre-cut-to-length spines (600/32”, 800/31”, 1000/30”, 1200/29”, 1400/28”)
Sold in ready-to-shoot factory feather fletched configurations only. Compatible with a wide-range of standard 4mm components.
PURPOSE:
Ready-to-shoot club/beginner target arrow
FEATURES:
Multi-layer wrapped 100% carbon-fiber construction
4mm parallel design
Straightness checked
Weight matched
Factory fletched with 2″ shield cut feather
Ready to shoot – cut to length with nocks & points installed
Ready to Shoot, feather-fletched, pointed, and nocked, the Vector is a high-strength, all- carbon shaft for low-weight, compound and recurve bows, from 10 to 29 lbs up to 27” draw. Sizes: 1000, 1400. Vector shafts are ideal for beginners needing a durable, lightweight carbon arrow with good rest clearance and forgiveness for finger shooters.
SPECIFICATIONS
Ideal for beginners looking for higher performance
Durable wrapped carbon construction
Nocks and 65-grain points installed—ready to shoot
Shield-feather fletch
Available in 1000 and 1400 spine sizes
Available in 4-pack or 72-count case
28″ length
The great look of traditional cedar paired with technically-advanced microlaminate carbon gives this reduced diameter hunting lethal strength and more kinetic storage - capable of taking the toughest game. The proved RPS insert system and accurate H nocks combine for total hunting performance.
Straightness: ±.003"H Nock – installedST RPS Inserts includedBroadhead Adapter Ring (BAR) recommended if required by broadhead designWeight (grains/inch) 10.3RPS Point (inch) 9/32
Carbon Axis and the appeal of original 1922 Doug Easton Traditional shafting. Nothing beats the look of natural wood grain.
SPECIFICATIONS
• Pre-installed X Nock• X HIT 8-32 inserts• Straightness: ± .003”• High-strength carbon-composite fibers
Brass X HIT® 8-32 Break-Off Insert & Deep Six thread RPS sold separately
Carbon Axis and the appeal of original 1922 Doug Easton Traditional shafting. Nothing beats the look of natural wood grain.
SPECIFICATIONS
• Pre-installed X Nock• X HIT 8-32 inserts• Straightness: ± .003”• High-strength carbon-composite fibers
Brass X HIT® 8-32 Break-Off Insert & Deep Six thread RPS sold separately
Carbon Axis and the appeal of original 1922 Doug Easton Traditional shafting. Nothing beats the look of natural wood grain.
SPECIFICATIONS
• Pre-installed X Nock• X HIT 8-32 inserts• Straightness: ± .003”• High-strength carbon-composite fibers
Brass X HIT® 8-32 Break-Off Insert & Deep Six thread RPS sold separately
Carbon Axis and the appeal of original 1922 Doug Easton Traditional shafting. Nothing beats the look of natural wood grain.
SPECIFICATIONS
• Pre-installed X Nock• X HIT 8-32 inserts• Straightness: ± .003”• High-strength carbon-composite fibers
Brass X HIT® 8-32 Break-Off Insert & Deep Six thread RPS sold separately
Carbon Axis and the appeal of original 1922 Doug Easton Traditional shafting. Nothing beats the look of natural wood grain.
SPECIFICATIONS
• Pre-installed X Nock• X HIT 8-32 inserts• Straightness: ± .003”• High-strength carbon-composite fibers
Brass X HIT® 8-32 Break-Off Insert & Deep Six thread RPS sold separately
Description
Formulated by using several of the most extremely robust and long lasting materials available, these Arrows & Shafts through Gold Tip can provide something that will give many years of consistency.
Gold Tip has been developing high quality merchandise for a number of years, and the Gold Tip Lightning 28 Inch Arrows is their approach to demonstrating exactly how much they are concerned.
Description
All carbon construction with a wood grain finish for traditional archers looking for an extremely durable arrow. Straightness tolerance of +-.003 and weight tolerance of +-2.0 grains. Available in sizes 600(7.8 GPI), 500 (8.6 GPI), 400 (9.3 GPI), and 340 (10.5 GPI). Includes nocks and inserts. Factory fletched with 5 in. barred feathers.
Features:
GPI 7.8
Length: 32"
Straightness Tolerance: +/- .3"
Weight Tolerance: +/- 2 gr
Outer Diameter: .295"
Inner Diameter: .246"
Description
Built of a heavyweight, small diameter carbon that is ideal for the traditional archer. Features a wood grain finish with the look of custom footing. Straightness tolerance of +-.003 and weight tolerance of +-2 gr. Available in sizes 600 (9.0 GPI), 500 (9.8 GPI), 400 (11.4 GPI), and 340 (12.1 GPI). Includes nocks, stainless steel inserts, and ballistic collars for increased front of center and durability. Factory fletched with 4 feathers.
Features:
GPI 12.
Length: 32"
Straightness Tolerance: +/- .3"
Weight Tolerance: +/- 2 gr
Outer Diameter: .286"
Inner Diameter: .24"
Description
All carbon construction with a wood grain finish for traditional archers looking for an extremely durable arrow. Straightness tolerance of +-.003 and weight tolerance of +-2.0 grains. Available in sizes 600(7.8 GPI), 500 (8.6 GPI), 400 (9.3 GPI), and 340 (10.5 GPI). Includes nocks and inserts. Factory fletched with 5 in. barred feathers.
Features:
GPI 7.8
Length: 32"
Straightness Tolerance: +/- .3"
Weight Tolerance: +/- 2 gr
Outer Diameter: .295"
Inner Diameter: .246"
Description
All carbon construction with a wood grain finish for traditional archers looking for an extremely durable arrow. Straightness tolerance of +-.003 and weight tolerance of +-2.0 grains. Available in sizes 600(7.8 GPI), 500 (8.6 GPI), 400 (9.3 GPI), and 340 (10.5 GPI). Includes nocks and inserts. Factory fletched with 5 in. barred feathers.
Features:
GPI 7.8
Length: 32"
Straightness Tolerance: +/- .3"
Weight Tolerance: +/- 2 gr
Outer Diameter: .295"
Inner Diameter: .246"
Description
Gold Tips Traditional Series combines the elegant look of classic wood-grained cedar with the proven performance and durability of 100% carbon construction.
Features:
Straightness tolerance: +-.003 in
Weight tolerance: +-2 gr
Recommended Point Weight: 75 - 150gr
Factory fletched with 5 in barred feathers
Grain: 8.6 GPI
Length: 32 in
Spine: .500 in
Description
All carbon construction with a wood grain finish for traditional archers looking for an extremely durable arrow. Straightness tolerance of +-.003 and weight tolerance of +-2.0 grains. Available in sizes 600(7.8 GPI), 500 (8.6 GPI), 400 (9.3 GPI), and 340 (10.5 GPI). Includes nocks and inserts. Factory fletched with 5 in. barred feathers.
Features:
GPI 7.8
Length: 32"
Straightness Tolerance: +/- .3"
Weight Tolerance: +/- 2 gr
Outer Diameter: .295"
Inner Diameter: .246"
Description
All carbon construction with a wood grain finish for traditional archers looking for an extremely durable arrow. Straightness tolerance of +-.003” and weight tolerance of +-2.0 grains. Available in sizes 600(7.8 GPI), 500 (8.6 GPI), 400 (9.3 GPI), and 340 (10.5 GPI). Includes nocks and inserts. Factory fletched with 5 in. barred feathers.
Features:
All carbon arrow with a woodgrain finish perfect for traditional archers
Straightness tolerance: +-.003"
Weight tolerance: +-2 gr.
Factory fletched with 5 in. barred feathers
Description
All carbon construction with a wood grain finish for traditional archers looking for an extremely durable arrow. Straightness tolerance of +-.003 and weight tolerance of +-2.0 grains. Available in sizes 600(7.8 GPI), 500 (8.6 GPI), 400 (9.3 GPI), and 340 (10.5 GPI). Includes nocks and inserts. Factory fletched with 5 in. barred feathers.
Features:
GPI 7.8
Length: 32"
Straightness Tolerance: +/- .3"
Weight Tolerance: +/- 2 gr
Outer Diameter: .295"
Inner Diameter: .246"
Carbon Axis and the appeal of original 1922 Doug Easton Traditional shafting. Nothing beats the look of natural wood grain.
SPECIFICATIONS
• Pre-installed X Nock• X HIT 8-32 inserts• Straightness: ± .003”• High-strength carbon-composite fibers
Brass X HIT® 8-32 Break-Off Insert & Deep Six thread RPS sold separately
SPECIFICATIONS
• Pre-installed X Nock• X HIT 8-32 inserts• Straightness: ± .003”• High-strength carbon-composite fibers
Brass X HIT® 8-32 Break-Off Insert & Deep Six thread RPS sold separately
Description
All carbon construction with a wood grain finish for traditional archers looking for an extremely durable arrow. Straightness tolerance of +-.006" and weight tolerance of +-2.0 grains. Available in sizes 600(7.8 GPI), 500 (8.6 GPI), 400 (9.3 GPI), and 340 (10.5 GPI). Includes nocks and inserts. Factory fletched with 4 in. feathers.
Features:
GPI 1.5
Length: 32"
Straightness Tolerance: +/- .6"
Weight Tolerance: +/- 2 gr
Outer Diameter: .38"
Inner Diameter: .246"
Description
Built of a heavyweight, small diameter carbon that is ideal for the traditional archer. Features a wood grain finish with the look of custom footing. Straightness tolerance of +-.003 and weight tolerance of +-2 gr. Available in sizes 600 (9.0 GPI), 500 (9.8 GPI), 400 (11.4 GPI), and 340 (12.1 GPI). Includes nocks, stainless steel inserts, and ballistic collars for increased front of center and durability. Factory fletched with 4 feathers.
Features:
GPI 12.
Length: 32"
Straightness Tolerance: +/- .3"
Weight Tolerance: +/- 2 gr
Outer Diameter: .286"
Inner Diameter: .24"
ARROWS FOR SHORTER-DRAW SHOOTERS.The ICS Hunter Junior is designed with beginners and other short-draw archersin mind – giving all hunters the opportunity to maximize their success.Get the strength, speed, and durability usually reserved for more expensive arrows.
The ICS HUNTER CLASSIC is the Made-in-USA arrow that is field-proven by millions of archers as the go-to arrow for all types of North American big game.Straightness: +/-. 003 "Direct-fit S Nock - installedCB Inserts - includedWeight (GRAINS/INCH) 9.3RPS Point (INCH) 5/16*Sold Individually*Field Points not Included
