The Pro Elite 400 Alpha-Blaze arrow provides bright illumination at the shot and the same point of impact as our unlighted arrows. The Alpha-Blaze Lighted Nock contains a one-piece Nock/LED unit that is indexed with the vanes and press fits into the arrow’s Aluminum Bushing. Upon firing the crossbow, the bowstring’s force compresses the two pieces and activates the lighted nock. Deactivate the easy on/off Alpha-Blaze lighted nock by pulling the nock straight out until the light turns off – no tools required. The LED light of the Alpha-Blaze system lasts for approximately twenty-four hours when activated. The Pro Elite 20-inch carbon arrow is TenPoint’s premier 410-grain 20” carbon arrow. Built for speed, the Pro Elite 400 is fletched slightly offset with 3″ Q2i Fusion X-II Vanes™ and TenPoint’s Alpha Nock HP Nock and Alpha Nock HP Nock Bushing. The Pro Elite 400 is fitted with a 58-grain aluminum insert and inspected for straightness to within .003″. TenPoint’s Alpha-Nock HP features a deep bowstring groove, a large smooth radius base, and elongated ears. Its HP Aluminum Bushing increases strength and accuracy. The string on TenPoint’s extremely narrow crossbows wraps tightly around the center of the Alpha-Nock HP resulting in straight nock travel and precision down-range accuracy, while minimizing string serving wear. Note:  Alpha-Brite lighted arrows come with original Alpha-Nocks. The Alpha-Nock HP can be used in any TenPoint, Wicked Ridge, or Horton Crossbow Innovations crossbow.  Use of the Alpha-Nock HP in any of these crossbows will not void the warranty, even if your crossbow originally required the use of a flat nock or Omni-Nock. *Note: Vane colors may vary

Read more less

Designed for optimal protection and durability, the water-resistant case features a semi-soft shell constructed from nylon and polyester, as well as a padded interior to safeguard the crossbow during travel. Lightweight and rugged, the lockable case is equipped with an extra-large exterior zippered pocket for storage of arrows, quiver, broadheads, lube, etc.  A side-mounted rubber grip handle provides easy transportation.  In addition, the case also features two foam-padded adjustable straps for comfortable backpack carry. *Fits Wicked Ridge models Blackhawk 360, Fury 410 De-Cock, Invader 400, M-370, NXT400, Raider 400 De-Cock, Rampage 360, RDX400, Warrior Ultra-Lite, Ranger X2, Invader X4, Woodsman 360, Rampage XS, Blackhawk XT, RDX 410, Invader M1, and Commander M1. Dimensions Case Length: 38″ Case Width: 22.5″ Case Depth: 10.75″

Read more less

8mm ropes are lighter, stronger and pack down smaller than the 11mm rope. 11mm ropes are optimized for use with the Ropeman 1 Ascender. 8mm ropes work with Kong Duck or Ropeman 4 Ascenders.8mm Lineman BeltWith this rope we were able to develop the world’s first commercially available 8mm rope with a factory spliced eye. This is a big deal because splices are much stronger than knots by anywhere from 30%-50%. Our splices tested at over 90% rope strength. This is simply not possible with knotted loops.Spliced eyes also reduce the weight and bulk of the rope by eliminating big knots.We like to girth hitch our ropes to a lineman loop on the side of the saddle.The 8mm Lineman Belt includes 8′ rope with one 5″ factory-spliced eye, 1 ultra lite carabiner, and prusik cord. Strength: 9,000 lbsSize: 8mm x 8′ double braid, DynaLite™ CoreLoop: 5″ Factory-spliced eyeColor: Ranger Green/Orange Weight: 8mm 10.18 oz and 11mm 16.29 oz 11mm Lineman BeltThe Lineman Belt is one of the most important pieces of kit in your arsenal. The Lineman Belt safely connects you to the tree while you climb, to help reduce the risk of a fall.Includes 8′ rope with one 2″ factory-spliced eye, 2 ultra lite carabiners, and prusik cord.Strength: 5,000 lbsSize: 1/2″ x 8′ double braidLoop: 2″ Factory-spliced/sewnColor: Foliage Green/Black Weight: 11mm 16.29 oz

Read more less

8mm ropes are lighter, stronger and pack down smaller than the 11mm rope. 11mm ropes are optimized for use with the Ropeman 1 Ascender. 8mm ropes work with Kong Duck or Ropeman 4 Ascender. 8mm Tree TetherFACTORY SPLICED EYES ARE A BIG DEALWith this rope we were able to develop the world’s first commercially available 8mm rope with a factory spliced eye. This is a big deal because splices are much stronger than knots by anywhere from 30%-50%. Our splices tested at over 90% rope strength. This is simply not possible with knotted loops.Spliced eyes also reduce the weight and bulk of the rope by eliminating big knots.The 8mm Tether includes 8′ rope with one 5″ factory-spliced eye, 1 ultra lite carabiner, and prusik cord.Strength: 9,000 lbsSize: 8mm x 8′ double braid, DynaLite™ CoreLoop: 5″ Factory-spliced eyeColor: Timber Brown Weight: 8mm 10.28 oz 11mm Tree TetherThe Tree Tether is one of the most important pieces of kit in your arsenal. The Tether safely connects you to the tree and enables you to maneuver for a shot.Includes 8′ rope with one 5″ factory-spliced eye, 1 ultra lite carabiner, and prusik cord.Strength: 5,000 lbs (11mm rope)Size: 1/2″ x 8′ double braid (11mm rope)Loop: 5″ Factory-spliced/sewnColor: Timber Brown/Orange Weight: 11mm 16.19 oz

Read more less

SUPER LIGHTWEIGHT, LESS THAN 2 POUNDS - Made on a strong Breathable No-See-Um Liner. DOES NOT SNAG OR PICK UP DEBRIS - The 3D leaves do not catch onto branches, pick up twigs and stickers. This blind is great for heavily wooded areas, areas with thick and tall brush. But it is also equally effective in open grass plains. SOFT LARGE DYNAMIC LEAVES. Our detailed deep leaf cuts make the leaves stand out more, giving you more depth in your 3D profile. We use a special material that produces a soft yet firm leaf. This causes the leaves to protrude more but also allows them to sway in the wind giving you additional dynamic camouflage, and with the two sided printing, when a leaves move, you are still concealed. Comes in sizes 5' x 16'   Lightweight Breathable No-See-Um Mesh Liner Dynamic 3D Leaves sewn directly to the outside Two Sided Printing

Read more less

SUPER LIGHTWEIGHT, LESS THAN 2 POUNDS - Made on a strong Breathable No-See-Um Liner, the 3d leafy suit is very breathable which makes it perfect for use in hot climates. It is also very portable and comes in its own zippered bag for easy transport and storage. DOES NOT SNAG OR PICK UP DEBRIS - Unlike traditional ghillie suits, the 3D leaves do not catch onto branches, pick up twigs and stickers. This camo suit stays relatively dirt free, keeping you light on your feet. This suit is great for heavily wooded areas, areas with thick and tall brush. But it is also equally effective in open grass plains. SOFT LARGE DYNAMIC LEAVES. Our detailed deep leaf cuts make the leaves stand out more, giving you more depth in your 3D profile. We use a special material that produces a soft yet firm leaf. This causes the leaves to protrude more but also allows them to sway in the wind giving you additional dynamic camouflage, and with the two sided printing, when a leaves move, you are still concealed. CARRYING BAG INCLUDED, TWO PIECE JACKET AND PANTS SET – the Jacket has an attached hood with a draw cord to cinch up tight to your face, and elastic on the waist. Snaps keep the front closed. The pants have elastic cuffs, and an elastic waist with a locking draw cord. JACKET HAS 2 ZIPPERED POCKETS. – the Jacket has an attached hood with a draw cord to cinch up tight to your face, 2 zippered pockets, and elastic on the waist. Snaps keep the front closed. The pants have elastic cuffs, and an elastic waist with a locking draw cord.

Read more less

Lightly padded and flexible   Provides added comfort and ease of movement Adjustable shoulder, leg, and rear straps   Ensures correct fit & extra comfort Quick release buckles  For maximum strength and safety Lineman Loops   With a lightweight padded belt The Venom Harness offers safety without sacrifice. It is lightly padded and flexible for added comfort and ease of movement. It has easily adjustable shoulder, leg, and rear straps that ensure correct fit and extra comfort along with quick connecting leg buckles and vertical climbing loops. One Size Fits Most – 300lb Maximum Weight Capacity Package includes: 1 carabiner, 1 suspension relief strap, and instruction manual

Read more less

The all-new Trophy Ridge Precise Pro 3 is redesigned with upgraded internals and pro-level features that give bowhunters more control, cleaner execution, and greater confidence with every shot. Featuring a compact 3-finger design, it fits naturally and comfortably in your hand for quick, confident handling and precise shooting. Inside, the Precise Pro 3 is completely reengineered with new internals, including a hardened steel sear, updated surface geometry, streamlined cocking button, reduced trigger travel, and a smaller thumb trigger for improved responsiveness. The 360° rotating caliper head eliminates torque for more natural shooting, while fully adjustable sear tension and thumb-trigger sensitivity let you fine-tune the feel to match your style. A durable wrist sling is included to keep your release secure and within easy reach. Finished in a modern matte black with a slim new logo, this T-handle is built for bowhunters who demand precision and expect performance. COMPACT CONTROL: 3-finger design delivers fast handling and a lower profile feel for a responsive, confident draw ALL-NEW INTERNALS: Hardened steel sear, updated surface geometry, streamlined cocking button, reduced trigger travel, and a smaller thumb trigger for faster, more consistent shots TORQUE-FREE PERFORMANCE: 360° rotating caliper head eliminates torque, making it easier to anchor and shoot with confidence CUSTOM FIT & FEEL: Fully adjustable sear tension and thumb-trigger sensitivity let you tailor the release to your shooting style READY WHEN YOU ARE: Includes a wrist sling for secure carry and quick access in the field

Read more less

The all-new Trophy Ridge Precise Pro 4 is redesigned with upgraded internals and pro-level features that give bowhunters more control, cleaner execution, and greater confidence with every shot. Featuring a 4-finger design, it offers maximum grip and leverage for steady, powerful draws and precise shooting. The Precise Pro 4 is completely reengineered with new hardened steel sear internals, reduced trigger travel, and a smaller trigger barrel for improved responsiveness. The 360° rotating caliper head eliminates torque for more natural shooting, while fully adjustable sear tension and thumb-trigger sensitivity let you fine-tune the feel to match your style. A durable wrist sling is included to keep your release secure and within easy reach. Finished in a textured, matte black anodize, this T-handle is built for bowhunters who demand precision and expect performance. FULL-HAND STABILITY: 4-finger design delivers maximum grip and leverage for a steady, confident draw ALL-NEW INTERNALS: Hardened steel sear, streamlined cocking button, reduced trigger travel, and a smaller thumb trigger for faster, more consistent shots TORQUE-FREE PERFORMANCE: 360° rotating caliper head eliminates torque, making it easier to anchor and shoot with confidence CUSTOM FIT & FEEL: Fully adjustable sear tension and thumb-trigger sensitivity let you tailor the release to your shooting style READY WHEN YOU ARE: Includes a wrist sling for secure carry and quick access in the field

Read more less