This is the vane that has dropped more jaws, hung more trophies, convinced more skeptics, and provided more big silly grins than all the "Knock-Off", "Wanna-Be", "Copy-Cat" vanes combined! This is the vane that, hands down, out-performed them all! The Blazer Vane, with its unique design, begins steering and correcting immediately - making believers out of bow hunters and target shooters alike all over the world. The combination of the steep leading edge angle and material stiffness enables the air to flow over the vane in a manner that actually creates lift. This leaves the tip of each vane inside undisturbed air, similar to the drafting principle used in auto racing. This airflow created by the precise leading edge angle allows the tip of each vane to act like a rudder, which is noticeable at longer distances with the flatter trajectory Blazer Vanes provide. Bohning has optimized the steerage capabilities and overall performance with tighter tolerances, making the Blazer the lightest, high performance broadhead vane ever produced. Well-known bow hunter Jay Gregory says "The coolest thing is with all the different options in colors and patterns in Bohning wraps and the awesome Blazer vanes, you can personalize your own mystical flight of the arrow!" The best hunting vane on the market!

Read more less

The Blazer® Vane is designed for steering fixed-blade broadheads and has been the #1 hunting vane for over 10 years! It measures 2" (50.8mm) in length, 0.53" (13.5mm) in height, and weighs an average of 6.1 grains (395mg). True Color printed Blazers weigh an average of 6.3 grains (408 mg). Like all Bohning vanes, the base of the Blazer Vane is pre-primed for optimal adhesion. 

Read more less

The 4" Bronco® Vane (formerly called the Killer Vane) is great for indoor compound archery and traditional archers looking for a profile similar to feathers but with superior durability. It measures 4" (101.6mm) in length and 0.52" (13.2mm) in height, and weighs an average of 12.5 grains (810 mg). Like all Bohning vanes, the base of the 4" Bronco Vane is pre-primed for optimal adhesion. Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.

Read more less

Durable polycarbonate D-Flector armguard with adjustable soft nylon straps. Contoured design with a raised center for added protection from bowstrings. Approximately 2" (5cm) across widest section, & 5.5" (14cm) in length. Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.

Read more less

The Heat® Vane, with its low profile and quiet flight, is ideal for bowhunting and 3D archery and is NASP approved. It quickly became popular for indoor spots and crossbow bolts as well. Its low profile provides more cable clearance, and the ultra-stiff material the Heat Vane is made of prevents vane flutter for a smooth, silent arrow rotation. When using with a fixed-blade broadhead, we recommend a four fletch. The Heat Vane measures 2.5" (63.5mm) in length, 0.41" (10.4mm) in height, and weighs an average of 6.1 grains (395mg). Like all Bohning vanes, the base of the Heat Vane is pre-primed for optimal adhesion. Due to the ultra-stiff material, we recommend using an instant glue and/or a fletching jig with high adhesion force such as Bohning's Tower Jig or Multi-Fletcher. Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.

Read more less

Bohning nocks were designed by Archery Hall-of-Famer and U.S. Olympic Coach Al Henderson. The Legend Nock is great for wood, fiberglass, Carbon, and swedged aluminum arrows and is available in many sizes.  Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States. NOT ALL BRANDS OF NOCKS ARE CREATED EQUAL At Bohning, every nock style must pass the following steps before introduction to the market: 1. Computer simulations identify potential weak points. 2. Destructive testing methods expose possible design flaws or material defects. 3. Accelerated life cycle testing using a custom-built bow is performed at kinetic energy levels exceeding 110 ft-lbs (nearly twice that of most hunting bows). A single nock must withstand over 1000 shots or it goes back to step 1. Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.

Read more less

Bohning's Slip-On Armguard features a rubber protection piece that is durable yet flexible and enclosed by our sleek, compression-fit nylon. Comfortable to wear and easy to take on and off. Protects the entire forearm and holds back bulky sleeves during your shot. See reference chart for sizing.

Read more less

Bohning's arrow wraps make your arrows more visible and are specially formulated to improve vane adhesion - plus they look sweet! Each color and pattern is available in five different widths in 4", 5.5" or 7" lengths. Each package contains 13 arrow wraps. XS wraps fit arrows with an OD up to 14/64" Small wraps fit arrows with an OD up to 17/64" Standard wraps fit arrows with an OD up to 19/64" Large wraps fit arrows with an OD up to 24/64" XL wraps fit arrows with an OD up to 26/64"

Read more less

DESCRIPTION Cut-out web design is durable yet very flexible Soft-finish rubber completely protects the forearm and will not absorb scent Open design allows for maximum ventilation to keep cool & comfortable Includes cut-to-size elastic for easy on/off and complete adjustability 6" long x 6" wide at front, 8" wide at rear

Read more less