Arrows

Pin-bushing for Victory V-Tac arrow shaft.

Read more less

Features: Carbon Composite Arrow Shaft  Cross-hole Drilled Includes Muzzy Bowfishing Lighted nock: Powered by Nockturnal Choice of Fish Tip Installed Choice of Bottle Slide Installed Add even more durability and better visibility to your bowfishing fun with the Muzzy Bowfishing Lighted Carbon Fish Arrow. Made of a lightweight and durable carbon composite, this tough arrow comes with a Muzzy Bowfishing Lighted nock installed for greater visibility on every shot. Tough 80% fiberglass/20% carbon construction gives this 5/16" arrow maximum durability and improved straightness for longer life and improved accuracy. Arrow also comes with a predrilled cross hole for tying your line or installing a safety slide. The set's preinstalled Gar or Carp Point combines a compact and rugged stainless steel ferrule with a hardened steel Trocar™ Tip on top for deep penetration through tough scales and bone. Easy-to-use design features dual barbs that hold tight until you land the fish, then release easily with 2 simple turns of the tip.

Read more less

Features: Carbon Composite Arrow Shaft  Cross-hole Drilled Includes Muzzy Bowfishing Lighted nock: Powered by Nockturnal Choice of Fish Tip Installed Choice of Bottle Slide Installed Add even more durability and better visibility to your bowfishing fun with the Muzzy Bowfishing Lighted Carbon Fish Arrow. Made of a lightweight and durable carbon composite, this tough arrow comes with a Muzzy Bowfishing Lighted nock installed for greater visibility on every shot. Tough 80% fiberglass/20% carbon construction gives this 5/16" arrow maximum durability and improved straightness for longer life and improved accuracy. Arrow also comes with a predrilled cross hole for tying your line or installing a safety slide. The set's preinstalled Gar or Carp Point combines a compact and rugged stainless steel ferrule with a hardened steel Trocar™ Tip on top for deep penetration through tough scales and bone. Easy-to-use design features dual barbs that hold tight until you land the fish, then release easily with 2 simple turns of the tip.

Read more less

Protect your arrow shafts with the 4mm pin. The 4mm pins are compatible with several target arrow shafts and Easton’s Pin™  Nocks and G Pin™ Nocks. Dozen Bag

Read more less

Inspiré is a carbon shaft produced to Easton quality tolerances with a wide range of spines for the beginning archer of any age. SPECIFICATIONS Small-diameter, micro-smooth carbon finish Available in ten sizes One-piece points included in factory-fletched shafts Parallel design Bulk-fletched arrows include points

Read more less

DESCRIPTION Easton’s 5MM Half-Out Insert is a convenient insert option compatible with any Easton 5mm arrow shaft.  Available in Aluminum or Stainless Steel configurations, this half-out delivers improved FOC versus conventional inserts

Read more less

Bohning's F Nock fits micro shafts with an ID of .166" (commonly known as 4mm or G Nock) shafts and G UNI Bushing systems. The F Nock features a double-lock throat of .120" (3.05mm). Each F Nock weighs an average of 6.5 grains (421.2 mg). Tech tip: for easier insertion and indexing, apply a small amount of Bohning's Tex-Tite or Seal-Tite Wax to the nock shank. NOT ALL BRANDS OF NOCKS ARE CREATED EQUAL At Bohning, every nock style must pass the following steps before introduction to the market: 1. Computer simulations identify potential weak points. 2. Destructive testing methods expose possible design flaws or material defects. 3. Accelerated life cycle testing using a custom-built bow is performed at kinetic energy levels exceeding 110 ft-lbs (nearly twice that of most hunting bows). A single nock must withstand over 1000 shots or it goes back to step 1. Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.

Read more less

Easton’s 4mm 8/32 Aluminum Half-Out is machined out of Aerospace 7075-T6 alloy and provides an affordable option for standard thread 8-32 broadheads and field points to be used with most of Easton’s 4mm Carbon, 4mm FMJ, and 4mm A/C shafts. Weighing 50 grains and available in 5 sizes to fit a wide range of spines, the half out utilizes a collared design at the connection point of the shaft for increased strength and a precise fit. Easton recommends that only 2-part Epoxy (No Quick Bond or any other CA adhesives) be used in order to maximize the strength and durability of the component. FEATURES:• 7075-T6 Aerospace Alloy Construction• 50 grains• Non-Reflective Black Anodize Coating• Utilizes a two-point interface for increased strength and precise fit• Sold in Dozen Bags

Read more less

Carbon Express D-Stroyer MX Hunter Features: Dual Spine Weight Forward - Patented 2 Spine arrow shaft that reduces oscillation by 50% vs single spine and has TWICE THE ACCURACY Buff Tuff Plus - Patented outer layer construction of 100% high modulus carbon weave for excellent strength and spine consistency constructed on the back 1/3 of the shaft Camo Buff Tuff - Patented outer layer construction that provides the world’s toughest and quietest carbon arrow finish that’s easier to remove from targets & constructed on the front 2/3rds of the shaft BullDog Nock Collar - Exclusive Feature made of aircraft grade aluminum that prevents impact damage Laser Match Set - Pack sets are sorted & matched by spine and weight for best-in-class consistency.  Spine sorting tolerance +/- .0025 & Weight sorting tolerance +/- 1.0 grains +/- .002" Real Straightness - Laser checked for straightness to a remarkable 1/10,000 of an inch Launchpad Precision Nocks - Controlled arrow release and integrated shaft alignment for more consistent accuracy Q2i 2” Rapt-X Vanes One Arrow, Two Spines for Twice the Accuracy, Durability, and Strength Further enhancing a reputation for delivering the world’s most accurate Dual Spine Arrows Carbon Express has once again broken the mold with the introduction of the D-Stroyer hunting arrow. With four distinct options to choose from the new D-Stroyer line from Carbon Express maximizes the performance of exclusive Dual Spine Weight Forward technology to deliver twice the accuracy and unprecedented performance when compared to traditional single spine arrow construction. The patented 2 Spine arrow shaft that reduces oscillation by 50% vs single spine and has TWICE THE ACCURACY!   Sizes/Spine: 300 (.300" spine), 350 (.350" spine), 400 (.400" spine)Available In: 12 pack shafts or 6 pack fletched arrowsLength: 31.5"Straightness factor: ±.002"Weight: 300 (9.7gpi), 350 (8.9gpi), 400 (8.0gpi)Weight tolerance: ±1 grain

Read more less