Arrows - Arrow Components - Half-Outs & Outserts

Easton’s 4MM Half-Out Insert is a convenient insert option compatible with any Easton 4mm arrow shaft.  The stainless steel version  delivers increased FOC versus the titanium version.  Stainless Steel Half-Out Specifications: 8-32 Thread 95 Grains 416 Stainless Steel Packaged per dozen Exposed length is 0.487″ Available Spring 2022

Read more less

DESCRIPTION Easton’s 5MM Half-Out Insert is a convenient insert option compatible with any Easton 5mm arrow shaft.  Available in Aluminum or Stainless Steel configurations, this half-out delivers improved FOC versus conventional inserts

Read more less

Give your carbon arrow shafts the Easton advantage. Half Out 5MM Inserts give your carbon shafts increased weight, length, and strength. They're a great option for archers who want a change from Easton HIT inserts. Increase your FOC (front of center) weight for better penetration. Both the steel and aluminum models offer more strength and protection for your carbon arrows. That saves you money and extends the life of your arrows. These Half Out inserts are also great for those who like Easton HIT inserts, but are looking for something that's easier to install. Easton Half Out 5MM Inserts fit .204" micro diameter arrows, and taper out to a 5/16" diameter for a flush fit with 5/16" points and broadheads. Measure approximately 1-3/8" long. Half Out Inserts extend approximately 1/2" from the arrow shaft.

Read more less

Easton’s 4mm 8/32 Aluminum Half-Out is machined out of Aerospace 7075-T6 alloy and provides an affordable option for standard thread 8-32 broadheads and field points to be used with most of Easton’s 4mm Carbon, 4mm FMJ, and 4mm A/C shafts. Weighing 50 grains and available in 5 sizes to fit a wide range of spines, the half out utilizes a collared design at the connection point of the shaft for increased strength and a precise fit. Easton recommends that only 2-part Epoxy (No Quick Bond or any other CA adhesives) be used in order to maximize the strength and durability of the component. FEATURES:• 7075-T6 Aerospace Alloy Construction• 50 grains• Non-Reflective Black Anodize Coating• Utilizes a two-point interface for increased strength and precise fit• Sold in Dozen Bags

Read more less

Easton’s 4mm 8/32 Aluminum Half-Out is machined out of Aerospace 7075-T6 alloy and provides an affordable option for standard thread 8-32 broadheads and field points to be used with most of Easton’s 4mm Carbon, 4mm FMJ, and 4mm A/C shafts. Weighing 50 grains and available in 5 sizes to fit a wide range of spines, the half out utilizes a collared design at the connection point of the shaft for increased strength and a precise fit. Easton recommends that only 2-part Epoxy (No Quick Bond or any other CA adhesives) be used in order to maximize the strength and durability of the component. FEATURES:• 7075-T6 Aerospace Alloy Construction• 50 grains• Non-Reflective Black Anodize Coating• Utilizes a two-point interface for increased strength and precise fit• Sold in Dozen Bags

Read more less

Easton’s 4mm 8/32 Aluminum Half-Out is machined out of Aerospace 7075-T6 alloy and provides an affordable option for standard thread 8-32 broadheads and field points to be used with most of Easton’s 4mm Carbon, 4mm FMJ, and 4mm A/C shafts. Weighing 50 grains and available in 5 sizes to fit a wide range of spines, the half out utilizes a collared design at the connection point of the shaft for increased strength and a precise fit. Easton recommends that only 2-part Epoxy (No Quick Bond or any other CA adhesives) be used in order to maximize the strength and durability of the component. FEATURES:• 7075-T6 Aerospace Alloy Construction• 50 grains• Non-Reflective Black Anodize Coating• Utilizes a two-point interface for increased strength and precise fit• Sold in Dozen Bags

Read more less

Easton’s 4mm 8/32 Aluminum Half-Out is machined out of Aerospace 7075-T6 alloy and provides an affordable option for standard thread 8-32 broadheads and field points to be used with most of Easton’s 4mm Carbon, 4mm FMJ, and 4mm A/C shafts. Weighing 50 grains and available in 5 sizes to fit a wide range of spines, the half out utilizes a collared design at the connection point of the shaft for increased strength and a precise fit. Easton recommends that only 2-part Epoxy (No Quick Bond or any other CA adhesives) be used in order to maximize the strength and durability of the component. FEATURES:• 7075-T6 Aerospace Alloy Construction• 50 grains• Non-Reflective Black Anodize Coating• Utilizes a two-point interface for increased strength and precise fit• Sold in Dozen Bags

Read more less

Easton’s 4MM Half-Out Insert is a convenient insert option compatible with any Easton 4mm arrow shaft.  The stainless steel version  delivers increased FOC versus the titanium version.  Stainless Steel Half-Out Specifications: 8-32 Thread 95 Grains 416 Stainless Steel Packaged per dozen Exposed length is 0.487″ Available Spring 2022

Read more less

Description Half out insert made for the Carbon Express Predator XSD arrow. Fits all standard thread field points and broadheads. Size 1 fits 300-350 spine shafts, Size 2 fits 400-500 spine shafts. Weight: 33 gr.SilverSmall Diameter CarbonHalf-out insertMade for Predator XSD arrowsFits standard threaded points and insertsManufacturer: Carbon ExpressModel: 50339

Read more less

Description Carbon Express Predator XSD .166 Inside Diameter In-Out Insert#1 Fits 300, 350 #50339#2 fits 400, 500 #50340

Read more less

Easton’s 4MM Half-Out Insert is a convenient insert option compatible with any Easton 4mm arrow shaft.  The stainless steel version  delivers increased FOC versus the titanium version.  Stainless Steel Half-Out Specifications: 8-32 Thread 95 Grains 416 Stainless Steel Packaged per dozen Exposed length is 0.487″ Available Spring 2022

Read more less

Easton’s 4mm 8/32 Aluminum Half-Out is machined out of Aerospace 7075-T6 alloy and provides an affordable option for standard thread 8-32 broadheads and field points to be used with most of Easton’s 4mm Carbon, 4mm FMJ, and 4mm A/C shafts. Weighing 50 grains and available in 5 sizes to fit a wide range of spines, the half out utilizes a collared design at the connection point of the shaft for increased strength and a precise fit. Easton recommends that only 2-part Epoxy (No Quick Bond or any other CA adhesives) be used in order to maximize the strength and durability of the component. FEATURES:• 7075-T6 Aerospace Alloy Construction• 50 grains• Non-Reflective Black Anodize Coating• Utilizes a two-point interface for increased strength and precise fit• Sold in Dozen Bags

Read more less

Easton’s 4MM Half-Out Insert is a convenient insert option compatible with any Easton 4mm arrow shaft.  The stainless steel version  delivers increased FOC versus the titanium version.  Stainless Steel Half-Out Specifications: 8-32 Thread 95 Grains 416 Stainless Steel Packaged per dozen Exposed length is 0.487″ Available Spring 2022

Read more less