Bohning's Slip-On Armguard features a rubber protection piece that is durable yet flexible and enclosed by our sleek, compression-fit nylon. Comfortable to wear and easy to take on and off. Protects the entire forearm and holds back bulky sleeves during your shot. See reference chart for sizing.

Read more less

The Alpha vane by Bohning is a design that combines stealth, speed and torque. The vane is made in our AR1250 material which is the stiffest and quietest we produce. The vane profile has an advanced Torque Apex, which is the position on the vane providing peak rotational torque, combined with a gradual taper to the tail of the vane which creates the optimal balance of spin and stealth. At the rear of the vane, you will see a contoured tail which minimizes vane flutter. Less vane flutter reduces noise and helps retain speed. The low profile allows clearance on even the tightest set-ups. Bohning’s AR1250 Material is a stiffer material that allows for fast, ultra-quiet flight over longer distances.  Our stiffer material also provides maximum speeds when fletched at a 1 degree offset, while staying silent.  Bohning AR1250 is also our lightest material.  All Bohning vanes are pre-primed and do not require vane cleaning or pen primers.  We recommend BlazerBond® or Fletch Fuse® adhesives for best adhesion.   

Read more less

The Atlas vane by Bohning is a design that combines maximum forgiveness with excellent rotational torque.  The Atlas profile has an advanced Torque Apex, which is the position on the vane providing peak rotational torque, combined with a gradual taper to the tail of the vane which creates the optimal balance of spin and stealth. At the rear of the vane, you will see a contoured tail which minimizes vane flutter. Less vane flutter reduces noise and helps retain speed. The low profile allows clearance on even the tightest set-ups. <BR> Bohning’s AR1000 Material is Bohning’s original vane material that provides for excellent adhesion and durability, while being extremely forgiving for any potential contact.  All Bohning vanes are pre-primed and do not require vane cleaning or pen primers.  For our most durable and flexible adhesion, Bohning suggests using Fletch-Tite Platinum® for our AR1000 material.  If faster cure times are needed, we recommend BlazerBond® or Fletch Fuse® adhesives.   

Read more less

The Heat® Vane, with its low profile and quiet flight, is ideal for bowhunting and 3D archery and is NASP approved. It quickly became popular for indoor spots and crossbow bolts as well. Its low profile provides more cable clearance, and the ultra-stiff material the Heat Vane is made of prevents vane flutter for a smooth, silent arrow rotation. When using with a fixed-blade broadhead, we recommend a four fletch. The Heat Vane measures 2.5" (63.5mm) in length, 0.41" (10.4mm) in height, and weighs an average of 6.1 grains (395mg). Like all Bohning vanes, the base of the Heat Vane is pre-primed for optimal adhesion. Due to the ultra-stiff material, we recommend using an instant glue and/or a fletching jig with high adhesion force such as Bohning's Tower Jig or Multi-Fletcher. Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.

Read more less

The 4" Bronco® Vane (formerly called the Killer Vane) is great for indoor compound archery and traditional archers looking for a profile similar to feathers but with superior durability. It measures 4" (101.6mm) in length and 0.52" (13.2mm) in height, and weighs an average of 12.5 grains (810 mg). Like all Bohning vanes, the base of the 4" Bronco Vane is pre-primed for optimal adhesion. Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.

Read more less

Bohning nocks were designed by Archery Hall-of-Famer and U.S. Olympic Coach Al Henderson. The Legend Nock is great for wood, fiberglass, Carbon, and swedged aluminum arrows and is available in many sizes.  Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States. NOT ALL BRANDS OF NOCKS ARE CREATED EQUAL At Bohning, every nock style must pass the following steps before introduction to the market: 1. Computer simulations identify potential weak points. 2. Destructive testing methods expose possible design flaws or material defects. 3. Accelerated life cycle testing using a custom-built bow is performed at kinetic energy levels exceeding 110 ft-lbs (nearly twice that of most hunting bows). A single nock must withstand over 1000 shots or it goes back to step 1. Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.

Read more less

The Blazer® Vane is designed for steering fixed-blade broadheads and has been the #1 hunting vane for over 10 years! It measures 2" (50.8mm) in length, 0.53" (13.5mm) in height, and weighs an average of 6.1 grains (395mg). True Color printed Blazers weigh an average of 6.3 grains (408 mg). Like all Bohning vanes, the base of the Blazer Vane is pre-primed for optimal adhesion. 

Read more less