The Harmonic Stabilizer is another exciting new innovation from Mathews, Inc. The Harmonic Stabilizer is purposely tuned to be out of phase with Mathews bow models that have longer risers, and can dampen more than 75% of residual vibration.
When placed in the bottom Harmonic Damper hole the Harmonic Stabilizer will give optimum performance. Another Harmonic Stabilizer can be purchased and put in the top damper hole for added weight but little is gained in post residual vibration. One Harmonic Stabilizer will be standard issue on the majority of newer model bows and can be purchased as an accessory to retrofit most Mathews bows currently equipped with Harmonic Dampers.
Manufactured in partnership with Shrewd Archery, the Quick Disconnect is machined from 6061 aluminum with an anodized finish and comes in a zero and eight degree angle.
Includes matching barrel nut and 5/16"-24 x 3/4" shcs. Features a 1" outside diameter for a flush fit with all Mathews Flatline stabilizers. Made in the USA.
The Mathews Bridge-Lock Adjustable V-Bar paired with the new Bridge-Lock Stabilizer creates an entirely new axis of customization and adjustability for your rear facing stabilizer. Adjustable in 1/2″ increments, you can modify the length of your rear facing stabilizer for a finer, more balanced hold. An integrated quick-disconnect allows you to easily remove or stow your rear facing stabilizer while not in use or during transport.
This first of its kind stackable weight system eliminates the limitations of a traditional threaded stud. A single locking screw allows you to add or remove 1 ounce weights to your Bridge-Lock Stabilizer for a finer, more balanced hold.
The patent pending InterLink Weight System utilizes these 1 ounce weights that can be added to your Bridge-Lock Stabilizer to customize the balance and harmonics of your bow.
Simply stack the desired number or interlocking weights onto each other and tighten the set screw on the stabilizer head to lock.
Description
Tournament proven side bar built with high modulus carbon for extreme rigidity and maximum stabilization. Uses independent weight system for customizable balance of your setup and greater down range accuracy. Weights not included.
Description
Competition side bar offers tournament grade performance at a more affordable price. Features an internal harmonic dampener to reduce vibration and an independent weight system for customized balancing of your setup. Weights not included.
Description
The V-bar block mounts allow archers to run either 1 or 2 V-bars. Adjustable V-bar block mounts also provide adjustment for up/down or in/out positioning for customized balance and stabilization. Machined teeth on all adjustable models assure a tight fit and no slip.
Description
Allows the archer to run one or two side bars and adjust them up and down or in and out for customized balance. Machined teeth assure a tight fit and no slip.
Description
Designed to hold a side bar and any amount of weight without losing rigidity. Machined teeth on both sides of the side bar elements assure a tight fit and no slip. Includes one quick disconnect for the side bar.
Features:
Black
Holds any side bar with any amount of weight
Machined teeth assures a tight fit with no slip
Includes quick disconnect for side bar
Black
Holds any side bar with any amount of weight
Machined teeth assures a tight fit with no slip
Includes quick disconnect for side bar
Description
Quick Disconnets: The Bee Stinger Quick Disconnects allow archers the ability to quickly and conveniently remove the stabilizers as needed while providing the most rigid coupling to the bow. This maximizes the bar’s effectiveness by eliminating a weak point in the stabilization system.
Side Bar Mounts: The one-sided mounts are built to support any size V-bar with any amount of weight, without compromising the rigidity of the connection. Machined teeth on both side bar elements assure a tight fit and no slip.
ELITE: Elite Side Arm Mount features an integrated Quick Disconnect for both the front and rear bars. Also with an up & down adjustment along with the side to side adjustment the Elite model gives you the ultimate in positioning. Strong, simple, less weight and easily disassembled for transport.
Description
The one-sided mounts are built to support any size V-bar with any amount of weight, without compromising the rigidity of the connection. Machined teeth on both side bar elements assure a tight fit and no slip.
The Mathews Genuine Adjustable V-Bar allows you to attach a rear stabilizer to your bow, taking your stabilizer set up to the next level.
This adjustable V-Bar is equipped with an anti-walkout washer, laser engraved indicators, a quick disconnect clamp system and drop-stopper shelf. Includes: barrel nut, washer, 5/16" - 24 x 1/2" bolt, attachment bolt, and bushing.