he LockDown saddle is the KING of COMFORT. Over the past 2 years we've tested and refined a new approach to our saddle lineup. We wanted to reimagine comfort and user-friendliness. The LockDown takes the best in class features from our Phantom like our UtiliBridge™, Comfort Channels™, and integrated lineman loops and adds in our Expandable Saddle Body with LockDown Link construction to create a mega-comfortable saddle that expands and contracts with you throughout your hunt. Not only does the LockDown revolutionize comfort in a saddle, but our new oversized LockDown Haulers with integrated skeleton frame make frustrating gear access a thing of the past. Finally, our new bomb proof yoke system means you can load up your LockDown and not worry about keeping it in place. The LockDown is the next evolution in saddle hunting comfort. You're gonna LOVE it. LOCKDOWN LINKS Our brand new LockDown Links are a fresh take on an expandable saddle. The biggest complaint with pleated saddles is the inability to close the pleat while in transport mode moving to and from your hunting area. They tend to open at the wrong time and flop around. Pleated saddles all suffer from this issue, and can lead to an annoying user experience. We re-engineered the concept and created an Expandable Saddle Body to work hand-in-hand with our LockDown Link system to solve this issue. Our Expandable Saddle Body allows the saddle to move with you while walking, climbing, and hunting. The LockDown Links are removeable, adjustable, and user replaceable. Hunters can dial in their specific comfort setting, and replace them if they wear out, get lost, or get damaged. You get two sets with the LockDown: 1 pre-installed, and 1 replacement set. LOCKDOWN HAULERS Our brand new LockDown Hauler with built in IFS (Internal Frame Structure) is the first of its kind. With IFS, gear management becomes so much easier. LockDown Haulers work like a dream by providing an incredibly simple one-handed operation. We also made the LockDown haulers plenty big for those who like to carry lots of gear. We doubled the volume compared to our original SYS Haulers, while reducing the exterior profile to make the LockDown even more sleek. They're sewn right into the saddle body which adds structure & comfort to the entire system. Finally, we added plenty of organization, and even a built-in grommet system for those who use a retractable gear hoist. Get Haulin! LOCKDOWN MODULAR YOKE Our brand new Yoke System takes Tethrd saddles to the next level. If you have issues with your saddle not wanting to stay put where you like it, our Yoke will solve that problem. It's light weight, modular, and bombproof. The LockDown comes with the Yoke ready to go. It's also removable in about 15 seconds. If you want to run your LockDown in minimalist mode, drop the Yoke at home and head to the woods. Finally, the Yoke is backwards compatible with our Phantom Saddle for when you want to hunt even lighter and faster. UTILIBRIDGE™ & COMFORT CHANNELS™ Our patented UtiliBridge™ is the KING of adjustable saddle hunting bridges. Your bridge is incredibly important for comfort, durability, and 360 degree shooting. With nearly 40 inches of on-the-fly adjustability, everyone can find their saddle hunting sweet spot. UtiliBridge™ works with your setup to make every hunt as simple as possible. Our patented Comfort Channels™ provide all day, unsurpassed comfort with seven different high, medium, and low support settings. The Comfort Channels allow simple, one-handed adjustment for leaning trees and weird positions, while giving you full control over where you need support most. MADE IN THE USA...MOSTLY In order to protect your wallets, we chose to manufacture the LockDown in a unique way. We built the load bearing components (Saddle Chassis, Bridge Loops, UtiliBridge, Lineman Loops, etc.) here in the USA. To save you money, we imported the non-load bearing components (LockDown Haulers & Yoke) from our overseas partners and assembled everything right here in Texas. This way you get the best of both worlds: Made in America load bearing components & assembly, and wallet-friendly off-shore accessories. So rest assured, if you see any "made in china" tags or uninformed comments on social media...that only applies to the non-load bearing accessories. We want to be transparent and honest so there's no surprises.

Read more less

8mm ropes are lighter, stronger and pack down smaller than the 11mm rope. 11mm ropes are optimized for use with the Ropeman 1 Ascender. 8mm ropes work with Kong Duck or Ropeman 4 Ascender. 8mm Tree TetherFACTORY SPLICED EYES ARE A BIG DEALWith this rope we were able to develop the world’s first commercially available 8mm rope with a factory spliced eye. This is a big deal because splices are much stronger than knots by anywhere from 30%-50%. Our splices tested at over 90% rope strength. This is simply not possible with knotted loops.Spliced eyes also reduce the weight and bulk of the rope by eliminating big knots.The 8mm Tether includes 8′ rope with one 5″ factory-spliced eye, 1 ultra lite carabiner, and prusik cord.Strength: 9,000 lbsSize: 8mm x 8′ double braid, DynaLite™ CoreLoop: 5″ Factory-spliced eyeColor: Timber Brown Weight: 8mm 10.28 oz 11mm Tree TetherThe Tree Tether is one of the most important pieces of kit in your arsenal. The Tether safely connects you to the tree and enables you to maneuver for a shot.Includes 8′ rope with one 5″ factory-spliced eye, 1 ultra lite carabiner, and prusik cord.Strength: 5,000 lbs (11mm rope)Size: 1/2″ x 8′ double braid (11mm rope)Loop: 5″ Factory-spliced/sewnColor: Timber Brown/Orange Weight: 11mm 16.19 oz

Read more less

8mm ropes are lighter, stronger and pack down smaller than the 11mm rope. 11mm ropes are optimized for use with the Ropeman 1 Ascender. 8mm ropes work with Kong Duck or Ropeman 4 Ascender. 8mm Tree TetherFACTORY SPLICED EYES ARE A BIG DEALWith this rope we were able to develop the world’s first commercially available 8mm rope with a factory spliced eye. This is a big deal because splices are much stronger than knots by anywhere from 30%-50%. Our splices tested at over 90% rope strength. This is simply not possible with knotted loops.Spliced eyes also reduce the weight and bulk of the rope by eliminating big knots.The 8mm Tether includes 8′ rope with one 5″ factory-spliced eye, 1 ultra lite carabiner, and prusik cord.Strength: 9,000 lbsSize: 8mm x 8′ double braid, DynaLite™ CoreLoop: 5″ Factory-spliced eyeColor: Timber Brown Weight: 8mm 10.28 oz 11mm Tree TetherThe Tree Tether is one of the most important pieces of kit in your arsenal. The Tether safely connects you to the tree and enables you to maneuver for a shot.Includes 8′ rope with one 5″ factory-spliced eye, 1 ultra lite carabiner, and prusik cord.Strength: 5,000 lbs (11mm rope)Size: 1/2″ x 8′ double braid (11mm rope)Loop: 5″ Factory-spliced/sewnColor: Timber Brown/Orange Weight: 11mm 16.19 oz

Read more less

8mm ropes are lighter, stronger and pack down smaller than the 11mm rope. 11mm ropes are optimized for use with the Ropeman 1 Ascender. 8mm ropes work with Kong Duck or Ropeman 4 Ascenders.8mm Lineman BeltWith this rope we were able to develop the world’s first commercially available 8mm rope with a factory spliced eye. This is a big deal because splices are much stronger than knots by anywhere from 30%-50%. Our splices tested at over 90% rope strength. This is simply not possible with knotted loops.Spliced eyes also reduce the weight and bulk of the rope by eliminating big knots.We like to girth hitch our ropes to a lineman loop on the side of the saddle.The 8mm Lineman Belt includes 8′ rope with one 5″ factory-spliced eye, 1 ultra lite carabiner, and prusik cord. Strength: 9,000 lbsSize: 8mm x 8′ double braid, DynaLite™ CoreLoop: 5″ Factory-spliced eyeColor: Ranger Green/Orange Weight: 8mm 10.18 oz and 11mm 16.29 oz 11mm Lineman BeltThe Lineman Belt is one of the most important pieces of kit in your arsenal. The Lineman Belt safely connects you to the tree while you climb, to help reduce the risk of a fall.Includes 8′ rope with one 2″ factory-spliced eye, 2 ultra lite carabiners, and prusik cord.Strength: 5,000 lbsSize: 1/2″ x 8′ double braidLoop: 2″ Factory-spliced/sewnColor: Foliage Green/Black Weight: 11mm 16.29 oz

Read more less

The QUICK DRAW bow hook is an incredibly simple and user friendly bow hook that works with our HYS Strap. If you don’t use a QuickDraw and HYS Strap – are you even a bow hunter? For years thousands of bow hunters have been using DIY Kydex hooks to hang their bows on the Tethrd HYS Strap. If you're a DIY guy and want a really simple, fun off-season project, follow Greg's DIY tutorial to make your own QuickDraw out of Kydex.If you don't trust hanging your bow from a piece of plastic, and want something a bit stronger...OR you're not really a DIY kinda guy...that's ok. We made the QuickDraw just for you. It's light, strong, and stupid simple. It attaches to the site or quiver frame on your bow with two small bolts (included). You can also use the quick draw on other items like quivers or other gear you want to hang.

Read more less

Foldable, stowable and lightweight. This grapple hook will become a staple in your saddle hunting kit. Use it to retrieve your pack, bow or anything else you leave at the base of tree while you set your climbing sticks.

Read more less

The Phantom is 100% Made in the USA. All day effortless comfort awaits. The Phantom is the next evolution in ultralight hunting. Try the Phantom and discover why hunters all over the world are ditching their tree stands for the saddle hunting revolution.Waist sizes 28″-36″ should select the Regular. Waist sizes 38″+ should select the XL. See “Sizing” info below for more info. SIZINGThe Tethrd® Phantom® is the result of 2 years of testing and research and development. The patent pending shape and cut means the Phantom® fits waist sizes from 28 inches to 40 inches. If your waist size is up to 36″, you should select the REGULAR. If you are a 36″ and larger, you should select the XL. However this isn’t set in stone. Some hunters with smaller waists, but with a little more “junk in the trunk” like to run the XL version. If you’re on the fence…you may want to size up first. But don’t worry no matter which way you go, we’ll get you sorted out if your size selection doesn’t work out.COMFORT CHANNELSThe patent pending Comfort Channels™ provide all day, unsurpassed comfort with easy to use high, medium, and low support settings. The Comfort Channels allow simple, one-handed, adjustment for leaning trees, and give you full control over where you need support most. If you like lower back support, move to the “high” Comfort Channel. If you like more support under your seat, move to the “low” Comfort Channel.UTILIBRIDGE™In the past hunters had to sacrifice user-friendliness, or accept more weight and bulk, to have a truly on-demand adjustable bridge. The patent pending UtiliBridge™ is the first of it’s kind constructed with Dynalite™. Our proprietary Dynalite™ material is made from ultra-high molecular weight polyethylene (UHMWPE) and is one of the strongest pound for pound fibers on the planet. It’s stronger than steel. It floats. It’s weather resistant. It’s ultralight. It can hold a jeep. Dynalite™ is perfect for outdoor applications. With nearly 30 inches of on-the-fly adjustability, everyone can find their saddle hunting sweet spot. There’s no metal, no bulk, and it’s the strongest adjustable bridge ever made. The UtiliBridge™ checks all the boxes and has tons of upside potential. Looking for the down side? Good luck.LINEMAN LOOPSThe Phantom has re-engineered lineman loops to make them more user friendly and even stronger than ever. The large patent pending lineman loops are easier to find and use in the dark, even with gloves on your hands during the late season. Rest assured the Phantom’s lineman loops will handle anything you can throw at them.FREEDOM BELTWe upgraded the waist belt on the Phantom to a completely new ultra-wide, ultra-adjustable design. We eliminated the tri-glide adjustment system used on all other Tethrd saddles. This simplified belt makes one-handed belt cinching a breeze. The all-new floating design means you have unlimited positioning options for your buckle. You can position the buckle on your left or right side, or right in the middle of your waist. You can also easily adjust the position for early season or late season settings.SUSPENSION KIT READYThe Phantom is ready to give you all the support you need. We’ve listened to a lot of saddle hunters who wished there was a suspender option for their saddle. Our brand new Suspension Kit is designed to work seamlessly with the Phantom. The Suspension Kit will also work with any saddle that incorporates standard molle loops. *Suspension Kit sold separately.Not only is the Phantom the most efficient elevated hunting saddle ever built…it’s 100% made in America. If you’re looking to be a more efficient hunter and eliminate as much weight and bulk as possible, congratulations…mission accomplished. WEIGHT RATING: 300 lbs

Read more less

The Phantom is 100% Made in the USA. All day effortless comfort awaits. The Phantom is the next evolution in ultralight hunting. Try the Phantom and discover why hunters all over the world are ditching their tree stands for the saddle hunting revolution.Waist sizes 28″-36″ should select the Regular. Waist sizes 38″+ should select the XL. See “Sizing” info below for more info. SIZINGThe Tethrd® Phantom® is the result of 2 years of testing and research and development. The patent pending shape and cut means the Phantom® fits waist sizes from 28 inches to 40 inches. If your waist size is up to 36″, you should select the REGULAR. If you are a 36″ and larger, you should select the XL. However this isn’t set in stone. Some hunters with smaller waists, but with a little more “junk in the trunk” like to run the XL version. If you’re on the fence…you may want to size up first. But don’t worry no matter which way you go, we’ll get you sorted out if your size selection doesn’t work out.COMFORT CHANNELSThe patent pending Comfort Channels™ provide all day, unsurpassed comfort with easy to use high, medium, and low support settings. The Comfort Channels allow simple, one-handed, adjustment for leaning trees, and give you full control over where you need support most. If you like lower back support, move to the “high” Comfort Channel. If you like more support under your seat, move to the “low” Comfort Channel.UTILIBRIDGE™In the past hunters had to sacrifice user-friendliness, or accept more weight and bulk, to have a truly on-demand adjustable bridge. The patent pending UtiliBridge™ is the first of it’s kind constructed with Dynalite™. Our proprietary Dynalite™ material is made from ultra-high molecular weight polyethylene (UHMWPE) and is one of the strongest pound for pound fibers on the planet. It’s stronger than steel. It floats. It’s weather resistant. It’s ultralight. It can hold a jeep. Dynalite™ is perfect for outdoor applications. With nearly 30 inches of on-the-fly adjustability, everyone can find their saddle hunting sweet spot. There’s no metal, no bulk, and it’s the strongest adjustable bridge ever made. The UtiliBridge™ checks all the boxes and has tons of upside potential. Looking for the down side? Good luck.LINEMAN LOOPSThe Phantom has re-engineered lineman loops to make them more user friendly and even stronger than ever. The large patent pending lineman loops are easier to find and use in the dark, even with gloves on your hands during the late season. Rest assured the Phantom’s lineman loops will handle anything you can throw at them.FREEDOM BELTWe upgraded the waist belt on the Phantom to a completely new ultra-wide, ultra-adjustable design. We eliminated the tri-glide adjustment system used on all other Tethrd saddles. This simplified belt makes one-handed belt cinching a breeze. The all-new floating design means you have unlimited positioning options for your buckle. You can position the buckle on your left or right side, or right in the middle of your waist. You can also easily adjust the position for early season or late season settings.SUSPENSION KIT READYThe Phantom is ready to give you all the support you need. We’ve listened to a lot of saddle hunters who wished there was a suspender option for their saddle. Our brand new Suspension Kit is designed to work seamlessly with the Phantom. The Suspension Kit will also work with any saddle that incorporates standard molle loops. *Suspension Kit sold separately.Not only is the Phantom the most efficient elevated hunting saddle ever built…it’s 100% made in America. If you’re looking to be a more efficient hunter and eliminate as much weight and bulk as possible, congratulations…mission accomplished. WEIGHT RATING: 300 lbs

Read more less

8mm ropes are lighter, stronger and pack down smaller than the 11mm rope. 11mm ropes are optimized for use with the Ropeman 1 Ascender. 8mm ropes work with Kong Duck or Ropeman 4 Ascenders.8mm Lineman BeltWith this rope we were able to develop the world’s first commercially available 8mm rope with a factory spliced eye. This is a big deal because splices are much stronger than knots by anywhere from 30%-50%. Our splices tested at over 90% rope strength. This is simply not possible with knotted loops.Spliced eyes also reduce the weight and bulk of the rope by eliminating big knots.We like to girth hitch our ropes to a lineman loop on the side of the saddle.The 8mm Lineman Belt includes 8′ rope with one 5″ factory-spliced eye, 1 ultra lite carabiner, and prusik cord. Strength: 9,000 lbsSize: 8mm x 8′ double braid, DynaLite™ CoreLoop: 5″ Factory-spliced eyeColor: Ranger Green/Orange Weight: 8mm 10.18 oz and 11mm 16.29 oz 11mm Lineman BeltThe Lineman Belt is one of the most important pieces of kit in your arsenal. The Lineman Belt safely connects you to the tree while you climb, to help reduce the risk of a fall.Includes 8′ rope with one 2″ factory-spliced eye, 2 ultra lite carabiners, and prusik cord.Strength: 5,000 lbsSize: 1/2″ x 8′ double braidLoop: 2″ Factory-spliced/sewnColor: Foliage Green/Black Weight: 11mm 16.29 oz

Read more less

The Compression Kit will work for any pack that has common loops, tab loops, or standard MOLLE webbing. The kit comes with 6 straps total: 4 short adjustment straps and 2 long straps. The short straps work great with our laser cut XL Predator packs and Standard size Predator packs. They'll also work great for a lot of other options. The longer straps have male/female side release buckles and are intended to strap bulky gear, climbing sticks, platforms, extra layers, or just about anything else to your pack.  Of course, our gear works with just about any manufacturer's packs and other products. However, it's all been purpose built for the Tethrd FAS Pack, Predator Packs, and climbing sticks.  Special thanks to Kifaru for allowing us to manufacture & use their discontinued "k-clips" Weight: 7.78 oz

Read more less

With the Phantom Saddle, we went for ultralight and very modular. That’s the reason it’s the greatest selling saddle of all time. But we listened to you guys who were willing to carry a bit more weight & bulk in exchange for maximum comfort and created the Ultralock. This thing is the Cadillac of Comfiness! The Ultralock includes: Ultralock Expandable Saddle, UtiliBridge™ & Comfort Channels™, 2x Ultralock Haulers with IFS, Ultralock Modular Yoke, 2 sets of Ultralock Links Regular = 28″-36″ waist | XL = +38″ waist The Ultralock saddle is the KING of COMFORT. Over the past 2 years we've tested and refined a new approach to our saddle lineup. We wanted to reimagine comfort and user-friendliness. The Ultralock takes the best in class features from our Phantom like our UtiliBridge™, Comfort Channels™, and integrated lineman loops and adds in our Expandable Saddle Body with Ultralock Link construction to create a mega-comfortable saddle that expands and contracts with you throughout your hunt. Not only does the Ultralock  revolutionize comfort in a saddle, but our new oversized Ultralock Haulers with integrated skeleton frame make frustrating gear access a thing of the past. Finally, our new bomb proof yoke system means you can load up your Ultralock and not worry about keeping it in place. The Ultralock is the next evolution in saddle hunting comfort. You're gonna LOVE it. ULTRALOCK LINKS Our brand new Ultralock Links are a fresh take on an expandable saddle. The biggest complaint with pleated saddles is the inability to close the pleat while in transport mode moving to and from your hunting area. They tend to open at the wrong time and flop around. Pleated saddles all suffer from this issue and can lead to an annoying user experience. We re-engineered the concept and created an Expandable Saddle Body to work hand-in-hand with our Ultralock Link system to solve this issue. Our Expandable Saddle Body allows the saddle to move with you while walking, climbing, and hunting. The Ultralock Links are removable, adjustable, and user replaceable. Hunters can dial in their specific comfort setting, and replace them if they wear out, get lost, or get damaged. You get two sets with the Ultralock : 1 pre-installed, and 1 replacement set. ULTRALOCK HAULERS Our brand new Ultralock Hauler with built in IFS (Internal Frame Structure) is the first of its kind. With IFS, gear management becomes so much easier. Ultralock Haulers work like a dream by providing an incredibly simple one-handed operation. We also made the Ultralock haulers plenty big for those who like to carry lots of gear. We doubled the volume compared to our original SYS Haulers, while reducing the exterior profile to make the Ultralock even more sleek. They're sewn right into the saddle body which adds structure & comfort to the entire system. Finally, we added plenty of organization, and even a built-in grommet system for those who use a retractable gear hoist. Get Haulin! ULTRALOCK MODULAR YOKE Our brand new Yoke System takes Tethrd saddles to the next level. If you have issues with your saddle not wanting to stay put where you like it, our Yoke will solve that problem. It's light weight, modular, and bombproof. The Ultralock comes with the Yoke ready to go. It's also removable in about 15 seconds. If you want to run your Ultralock in minimalist mode, drop the Yoke at home and head to the woods. Finally, the Yoke is backwards compatible with our Phantom Saddle for when you want to hunt even lighter and faster. UTILIBRIDGE™ & COMFORT CHANNELS™ Our patented UtiliBridge™ is the KING of adjustable saddle hunting bridges. Your bridge is incredibly important for comfort, durability, and 360 degree shooting. With nearly 40 inches of on-the-fly adjustability, everyone can find their saddle hunting sweet spot. UtiliBridge™ works with your setup to make every hunt as simple as possible. Our patented Comfort Channels™ provide all day, unsurpassed comfort with seven different high, medium, and low support settings. The Comfort Channels allow simple, one-handed adjustment for leaning trees and weird positions, while giving you full control over where you need support most. MADE IN THE USA...MOSTLY In order to protect your wallets, we chose to manufacture the Ultralock in a unique way. We built the load bearing components (Saddle Chassis, Bridge Loops, UtiliBridge, Lineman Loops, etc.) here in the USA. To save you money, we imported the non-load bearing components (Ultralock Haulers & Yoke) from our overseas partners and assembled everything right here in Texas. This way you get the best of both worlds: Made in America load bearing components & assembly, and wallet-friendly off-shore accessories. So rest assured, if you see any "made in China" tags or uninformed comments on social media...that only applies to the non-load bearing accessories. We want to be transparent and honest so there's no surprises. Weight Rating: 300lbs

Read more less

Tethrd Suspenders Provides extra support for saddles (prevents sagging) Compatible with Phantom & Phantom XL saddles Backwards compatible with all Tethrd saddles   The Suspender Kit comes with 3 connection options: 1. Connect directly to the built-in suspender tabs. This is the best option for the Phantom & Phantom XL. 2. Use the standard MOLLE 3 bar slider connection tabs (included). These function similarly to our SYS Hauler hookups. This is the best option for Tethrd Saddles with standard MOLLE, but no suspender tabs. This option will also work with any saddle built using industry standard MILSPEC MOLLE construction. 3. Use the girth hitch loop (included). If your saddle manufacturer decided not to use the industry standard MILSPEC MOLLE construction.

Read more less

All day effortless comfort awaits. The Phantom is the next evolution in ultralight hunting. Try the Phantom and discover why hunters all over the world are ditching their tree stands for the saddle hunting revolution. Waist sizes 28"-36" should select the Regular. Waist sizes 38"+ should select the XL. See "Sizing" info below for more info.

Read more less

The Tethrd Knee Pads are the new standard in saddle hunting knee protection. Whether you’re a new saddle hunter, or an OG, the knee pad can make or break your hunt. We took our favorite kneepads from the mountain climbing industry and MADE THEM WORK FOR US. We TRIPLED the padding, added hexagonal gripping lugs, overlayed them with a slide-stopping rubber coating, and made them more saddle hunter friendly. EXTRA PADDINGWe designed our knee pads with a triple dose of comfortable closed-cell foam padding. These Knee Pads have cushion and strength exactly where you need them. They’ll last forever and save your knees on those long sits. TREE GRIPPINGWe engineered a raised honeycomb gripping surface to provide more bite and leverage during your hunt. But we didn’t stop there. We added an EXTRA super-grippy rubber on the face to keep your knees right where you want them. ONE OF A KIND CAMOOur knee pads use a one-of-a-kind camo process ensuring every single one is uniquely camouflaged. Do the deer care if your knee pads are camo? Probably not…but they sure do look cool. EASY ATTACHMENTOur stretch straps allow you to put them on at the truck and walk to your tree. They’re also light and small enough to pack in if you don’t like wearing knee pads while walking. With a simple attachment and bomb proof construction, the Tethrd Knee Pads leave everything else in the dust. KNEE PAD SPECS 11 oz Total weight (pair) Raised hexagonal gripping lugs Rubber gripping layer against the tree Stretchy knee straps for easy walking

Read more less

The Modular Versatile Panel was built to add even more flexibility to our single panel saddle systems. It can replace the Recliner if a hunter feels they need something just a little more robust. It was designed to go from your “knee pits to your arm pits”. Because of the modular build, it can work with any saddle system, no matter the brand or design. The construction was beefed up quite a bit from the Recliner and designed to by bomb proof. We also built the MVP around two off-the-shelf and user replaceable elastic ITW clips. This is designed to connect the MVP to your bridge loops and keep it EXACTLY where you want it for lower back support. We originally created some proprietary methods for this connection, but in the end we decided to make it roll-tide-simple. The MVP comes in two sizes: standard & XL. If you buy jackets or hoodies in sizes Small-XL you should get the standard sized MVP. If your jackets and hoodies are 2X+, you should go with the XL. The XL adds even more length to get the buckles further in front of the hunter for quick & easy adjustments.

Read more less

It comes in two sizes: standard & XL. If you are a small-large hunter, go with the standard. If you are an XL hunter, go with the XL. The Modular Versatile Panel was built to add even more flexibility to our single panel saddle systems. It can replace the Recliner if a hunter feels they need something just a little more robust.It was designed to go from your “knee pits to your arm pits”. Because of the modular build, it can work with any saddle system, no matter the brand or design. The construction was beefed up quite a bit from the Recliner and designed to by bomb proof.We also built the MVP around two off-the-shelf and user replaceable elastic ITW clips. This is designed to connect the MVP to your bridge loops and keep it EXACTLY where you want it for lower back support. We originally created some proprietary methods for this connection, but in the end we decided to make it roll-tide-simple.The MVP comes in two sizes: standard & XL. If you buy jackets or hoodies in sizes Small-XL you should get the standard sized MVP. If your jackets and hoodies are 2X+, you should go with the XL. The XL adds even more length to get the buckles further in front of the hunter for quick & easy adjustments.Should I replace my Recliner with the MVP?Maybe. Greg decided to run the original Recliner, but Ernie likes the greater versatility of the MVP. If you’re more of a minimalist in your setup, we recommend the Recliner. But if you’ve ever found yourself wanting a more substantial back support, or you’ve been curious about a 2 panel saddle…the MVP can give you the best of both worlds.All 2 panel saddles (even our ESS) have a flaw. Neither panel can be adjusted truly independently of one another for better back support. Because they are connected at the bridge loops, the movement of one panel must affect the movement of the other. This tends to not be an issue when a hunter is overlapping the panels for a deeper or more shallow seat. However, when it comes to back support, a traditional 2 panel saddle kinda sucks.Since the MVP is an independent panel connected to your tether carabiner, you can put it wherever you want.Under your knees? YUP.Way up under your arm pits? YUP.Overlapping your saddle for more support? YUP Weight: 6.4 oz Standard and 6.88 oz XL

Read more less