AMS

Head out to the lake to bowfish using the AMS Chaos FX XL Barb Bowfishing Point. Its stainless-steel construction provides durability, and the Cyclone® tip exhibits power and penetration. The 2 stationary, heavy gauge barbs grab and hold onto fish efficiently. Features and Benefits Stainless-steel construction Loosen the tip easily to release fish Cyclone® tip provides strength Inside diameter of 0.31 inches 2 stationary, heavy gauge barbs require minimal penetration Wire barbs spread to 1.13 inches of holding area Weighs 272 grains Works with all fish and depths of water What's in the Box AMS Chaos FX XL Barb Bowfishing Point

Read more less

20 yard length Fills 2 regular sized bottles or 1 long bottle 640 pound strength

Read more less

These AMS developed, carbon spined®, shafts are fiberglass cored with five sections of carbon fiber. These arrows are ultra-straight and have more spine than fiberglass alone. The additional spine provides a more stable, more accurate shot. We recommend these arrows for those shooting at higher draw weights. Each shaft is manually inspected by AMS for straightness and only the straightest shafts are used! Each shaft is 5/16" in diameter and 32" long. This complete, ready to shoot arrow will also include the patented AMS EverGlide® Safety Slide® system installed to the shaft. (US Patent 6,517,453). Big Game BreakAway arrows and points are meant to be used on alligator, shark or other similar game. By using our special collar system, you'll tie a section of line to a small ring on the shaft and tie the end of the line to the point. This method allows the shaft to be pulled free from the point and hanging from the ring when the target is hit. The collar system controls the slack line on the shaft. The ability to remove the shaft from point minimizes arrow damage from rolling or thrashing after the shot.

Read more less

This life belt gives you a full range of motion with a sense of security for the unexpected when on the water. An adjustable belt secures around  your waist. Just pull the manual tab to inflate. The belt ships fully charged and ready to use.

Read more less

An updated version of the standard finger tabs to protect your fingers on those all night and all day bowfishing trips. Extended length provides adequate room for larger fingers. • Ultra Tough• Superior Durability• Super Comfortable• Minimize Finger Pinch

Read more less

This is a AMS Lava Crux® Carbon Cored Fiberglass Arrow Shaft with AnKor® FX Point & AMS EverGlide™ Safety Slide® featured by AMS Bowfishing. Archery Country carries a large selection of archery supplies, bows, and archery accessories.

Read more less

When the bowfishing line is tied directly to the tail of an arrow, it can knot with the bowstrings as you draw back. The knot will cause the arrow to stop short in mid-flight and suddenly “snap-back” toward the shooter. AMS Safety Slides were designed to keep the bowfishing line out in front of the bow at all times. Simply nock your arrow with the Safety Slide out in front of your rest. Tighten the line on your Retriever between it and the slide and push the line into the Line Retainer found on the side of your reel. As you draw the Safety Slide will stay stationary as the arrow moves back. When the shot is released, the slide moves back to the tail of the arrow and stops at the Shock Pad allowing the line to trail for perfect arrow flight. 5 sets per pack. Pack includes: Safety Slides, Shock Pads, Shock Pad Bushings and Screws.

Read more less

 AMS Bowfishing Ring sets, 22/64" Arrows, 10 pk. AMS Ring Sets function in the same manner as the Safety Slides but have a small Fillister stop screw instead of the shock pad. This allows them to be used in areas where space is limited like next to the retention spring on a crossbow.  These hand-welded, stainless steel rings are perfect for salt water conditions and incredibly strong. Kit includes 10 rings and 10 Fillister screws. 

Read more less

Experience night bowfishing at its best with the new AMS Special Ops Night Vision System! Packed with a 400 Lumen LED light, it is extremely bright. Light comes with 2 switch options; a cap switch at the back of the light and an extended pressure switch which can be positioned anywhere on the bow. This special feature gives you the ability to press the light on and off quickly. A great option when dealing with fish that “spook” easily, plus it conserves battery life. Our patent pending Special Ops Bracket fits in the standard sight holes on most bows and behind any AMS Retriever allowing the light to be positioned at eye-level. The light has a continuous life up to 4 hours or, with normal on/off use, 2 – 3 nights. Kit includes light, mount bracket, cap switch, pressure switch, 2 batteries CR123A batteries and red, blue and green light filters.  Included Special Ops Night Vision Light 2 CR123 Batteries Mount Bracket and Screws Sheath for storage or wearing on belt 3 filters: red, blue and green Technical Specifications 400 Lumen Ultra-Bright Flashlight Pressure switch and push button tail caps Surep quick removal from custom mount bracket Mounts in-line with your vision for optimal performance Several nights of standard On/Off use battery life Four hours continuous use

Read more less

For increased accuracy, some bowfishers prefer to use a sight when bowfishing. This machined aluminum sight mounts directly beneath your AMS Retriever®. A huge 2″ diameter aperture allows a clear view to the target. You’ll be filling more barrels using this sight! Fully protected, .019″ diameter fiber optic pin Markings for windage and elevation adjustment Violet rheostat LED light Sight level

Read more less

Finally, a durable and easy to install crossbow mount made specifically for bowfishing! The AMS Sleek-X crossbow mount is made of smooth and strong anodized aluminum. This 3 piece system, has a mounting bracket that attaches in the standard quiver holes (1 5/16″ center to center) of most crossbows. It is adaptable to both parallel and perpendicular hole patterns and mounts with 2 screws. The handle of the Sleek-X attaches to the mounting bracket with the use of a thumb screw. It is universal to both right and left handed shooters. To remove the handle, simply loosen the thumb screw and pull the handle from the mounting bracket. All AMS Retriever® reels will fit on this mount. A threaded hole at the base of the mount is ready for use with the big game float systems. Made in America!

Read more less