This Bow Case Has It ALL!  Features: Fits bows up to 41" long and 19" wide 10 exterior accessory pouches Arrow box pouch Removable shoulder strap Interior Length 41 in 104.14 cm Interior Width 19 in 48.26 cm Interior Depth 5 in 12.70 cm Product Weight 4.25 lb 1.93 kg Exterior Length 42 in 106.68 cm Exterior Width 17 in 43.18 cm Exterior Height 4 in 10.16 cm Carton Length 43 in 109.22 cm Carton Width 18.5 in 46.99 cm Carton Height 10 in 25.40 cm Shipping Weight 20.75 lb 9.41 kg

Read more less

Features custom foam that fits the Ravin R50x and R500 Sniper or R500E with accessories.

Read more less

The iSeries 3019-12 Mission Sub-1 Crossbow Case is an injection molded, watertight case featuring a custom cut high density foam to fit a Sub-1 Crossbow, quiver, and accessories ( 3 cavities), along with wheels and a tow handle for easy transport. Also compatible with Mission Sub-1 XR and Sub-1 Lite. SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, patented trigger release latches, snap-down rubber over-molded cushion grip handle, and resistance to UV, solvents, corrosion.

Read more less

Description The SKB iSeries TenPoint Vapor RS470 Crossbow Case is specifically designed to hold the TenPoint crossbow with a scope plus accessories in the main insert portion and a quiver loaded with bolts in the lid. Made of high-strength polypropylene copolymer resin, the case is impact-resistant and built with low-profile wheels. It has a telescoping handle, so you can pull it behind you. If you need more freedom of movement, there are comfortable overmolded handles on three sides for hand carrying. Design features include gasket sealing that makes the case dust and waterproof, a molded-in hinge for added strength, six stainless steel reinforced padlock holes, and six trigger release latches that compress the O-ring and seal the case tight. The case is resistant to a variety of hazards that you may encounter, such as ultraviolet (UV) radiation, chemical solvents, corrosion, and even fungi. A pressure relief valve comes into play during air transport by regulating the internal pressure, keeping your gear and the case from getting crushed and allowing you to open the case without having to break a tough pressurized seal that could otherwise develop.

Read more less

Unmatched Protection for Your Premium Bows Precision-engineered for Mathews 29" PHASE4, 27" V3, and 29" V3X bows Custom foam interior secures bows up to 34.5" long and 13.75" wide Safeguards your investment from wear and tear Ultimate Convenience for the Modern Archer Ingenious lid storage for quiver, arrows, and accessory boxes. Sold here. Stay organized and focused on perfecting your shot Rugged Durability Built for Adventure Constructed from ultra high-strength polypropylene copolymer resin Gasket-sealed, water and dust-tight, submersible design (MIL-STD 810G) Resists corrosion, impact damage, and the elements with ease Additional Outstanding Features Molded-in hinges, padlock loops, and patented trigger-release latches Snap-down rubber over-molded cushion grip handle for comfortable transportation Automatic ambient pressure equalization valve (MIL-STD 810G) Resistance to UV, solvents, corrosion, fungus, and impact damage (MIL-STD 810G)

Read more less

Description The SKB iSeries TenPoint Vengent S440 / Viper S400 Crossbow Case is specifically designed to hold the TenPoint crossbow with a scope plus accessories in the main insert portion and a quiver loaded with bolts in the lid. Made of high-strength polypropylene copolymer resin, the case is impact-resistant and built with low-profile wheels. It has a telescoping handle, so you can pull it behind you. If you need more freedom of movement, there are comfortable overmolded handles on three sides for hand carrying. Design features include gasket sealing that makes the case dust and waterproof, a molded-in hinge for added strength, six stainless steel reinforced padlock holes, and six trigger release latches that compress the O-ring and seal the case tight. The case is resistant to a variety of hazards that you may encounter, such as ultraviolet (UV) radiation, chemical solvents, corrosion, and even fungi. A pressure relief valve comes into play during air transport by regulating the internal pressure, keeping your gear and the case from getting crushed and allowing you to open the case without having to break a tough pressurized seal that could otherwise develop.

Read more less

Description En route to your next hunt or competition, the SKB Bow Traveler Case lets you bring one piece of luggage instead of two. This 42 x 20 x 13" case has a padded, rigid lower compartment for your bow with securing straps and five handy accessory pockets, and an upper compartment for clothes and essentials. Heavy-duty wheels make it easy to roll the case through the airport and padded handles allow for a secure and comfortable grip. Black rail guards protect the case from the bumping and jostling of travel and there's a pocket for an ID. Despite its rugged construction, the case weighs just 13 pounds.

Read more less

Description The interior of the SKB Cases iSeries 5014 Double Bow Case 3i-5014-DB-M measures 50" L x 13.5" W x 6" D and features a bunk-bed storage system with rigid foam dividers to provide separate compartments with convoluted foam in the lid for stable positioning of two bows or a bow/rifle combination. The SKB Cases Double Bow Archery Case has four (4) SKB Cases patented trigger latches, four reinforced padlock locations that will accommodate a customer supplied lock and in-line skate style wheels so transporting your gear around the world or in the back of your truck is worry and trouble free. SKB's iSeries of injection molded watertight cases are constructed of ultra high-strength polypropylene copolymer resin and feature a gasketed, waterproof and dustproof, submersible design (IP67) that is resistant to corrosion and impact damage. The molded-in hinge and stainless steel hinge pins, patented "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handles on three sides, secure stacking, and an automatic ambient pressure equalization valve (MIL-STD-648C) all contribute to the military grade design of the SKB Cases iSeries Double Bow Soft Archery Case.

Read more less

Description The iSeries Ravin R26 and R29 Crossbow Case has been designed specifically to fit the Ravin R26, R29, R29X, and R29X Sniper Package. Featuring watertight, dustproof, military-grade construction, this iSeries case was built to meet all the demands and specifications of the US Military and is the perfect solution to protect your valuable crossbow investment. Indeed, SKB Cases was recently named as the official case and gun protector of the US Olympic Shooting Team in recognition of SKB's superior quality, craftsmanship, and gear protection. Features: Interior Dimensions: 30.00" L x 19.50" W x 12.00" D Color & Interior: Black / Custom

Read more less

This case includes a rigid foam bunk-bed style system for protection and stable positioning of two bows or a bow/rifle combination, as well as an overall 10" depth for more gear storage. SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H). Prop65 Information This product can expose you to chemicals including carbon black, which is known to the State of California to cause cancer and birth defects or other reproductive harm. To understand why we must make this statement please click on the Prop 65 tab above. For more information on Prop 65, go to www.P65Warnings.ca.gov.

Read more less

Description The SKB Cases ATA Crossbow Case features an ABS exterior with rigid molded EPS foam inserts and accommodates most of the crossbows produced by Horton, Barnett, Darton, Parker, Diamond Stryker, Ten Point and others. This SKB Cases ATA Crossbow Case w/ Carry Handles features an ABS exterior with rigid molded EPS foam inserts, stylish embossing that adds structural support to lid, molded-in bumpers to protect hardware from impact, lockable draw-bolt metal latches, convenient wheels, molded-in pull-handle and comfortable carrying handle. Like all SKB's the SKB Cases ATA Crossbow Case w/ Quiet-glide Wheels features the "Perfect Match" valance bending system that provides a tight and secure fit to prevent dirt, dust and moisture from the interior of the case. The interior provides extended capacity to accommodate larger scopes and strategic compression pads to prevent movement inside the case.

Read more less

Description Meant to be described as a great item for almost anyone, we're positive you are going to appreciate the SKB Cases MIL-STD Injection-Molded Recurve Bow Case - Single . Formulated working with several of the very most heavy duty and long lasting components around, these Bow Cases by SKB Cases will provide you with something that will give you a great deal of reliability. SKB Cases has been making top quality products for a number of years, and the SKB Cases MIL-STD Injection-Molded Recurve Bow Case - Single is their particular means of demonstrating just how much they care.

Read more less

The iSeries Hoyt medium single bow case fits Hoyt parallel limb bows up to 34.5" long and includes lid storage for the quiver, a dozen arrows, and accessory boxes (sold separately – Part# 3i-0702-1B). SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H). Prop65 Information This product can expose you to chemicals including carbon black, which is known to the State of California to cause cancer and birth defects or other reproductive harm. To understand why we must make this statement please click on the Prop 65 tab above. For more information on Prop 65, go to www.P65Warnings.ca.gov.

Read more less

Description This black SKB Hoyt 4214 Parallel Limb Bow Case provides up to 40.0" x 14.5" x 5.0" of capacity and is designed to protect its contents from impacts, moisture, dirt, or corrosion. Low-profile, built-in wheels and three large, ergonomic handles allow for easy movement and carry. Utilizing a polypropylene, rubber, and stainless steel construction, the SKB Hoyt 4214 Parallel Limb Bow Case is IP67 and MIL-STD-648C compliant. When closed, this bow case's interior is fully sealed from dust, as well as water from 5.9" to 3.3' deep, while providing long-lasting resistance to wear and tear. Features Built to military standards Quiver compartment Accessory box compartments for i-series 0702-1 cases Waterjet cut foam arrow system (up to a dozen arrows) In-line skate style wheels for easy transport Trigger release latch system (can be retrofitted with TSA accepted key locking latches) Padlock holes include stainless steel padlock protector clips Snap-down cushion grip handles on three sides for comfortable lifting and carrying Waterproof and dust tight design (MIL-STD 810G) Molded-in hinge for added protection Ambient pressure equalization valve (MIL-STD 810G) Resistant to UV, solvents, corrosion, fungus (MIL-STD 810G) Resistant to impact damage (MIL-STD 810G) Lifetime warranty $1500 content coverage Proudly made in the U.S.A

Read more less

Description The OD green iSeries 4214 Parallel-Limb Bow Case is designed to hold most medium-sized parallel-limb style bows. This impact-resistant case is made from injection-molded polypropylene copolymer resin to be resistant to UV radiation, solvents, corrosion, and fungi according to MIL-STD-810F standards It is gasket-sealed to make it dust and waterproof. Molded-in hinges, patented trigger release latches, and padlock holes with stainless steel protector clips add to the security of the case. Cushion grip handles on three sides for comfortable lifting and carrying, and in-line skate-style wheels on the side allow it to be pulled along the ground when the case is packed.

Read more less

Description Exterior Dimension (L x W x H): 45" x 17" x 6.25" Interior Dimensions (L x W x H): 39.75" x 13" x 3.75" Product Weight: 18.67 Lbs. The 3i-4214-PL MIL-STD Injection Molded Parallel Limb Bow case features a completly custom foam insert for secure positioning and cushioning of your bow and a waterjet cut foam arrow system for up to 12 arrows. To maximize the benefits of their latest size of MIL-STD Injection Molded Watertight cases, SKB has developed new interiors for the newest 3i Series case, the 3i-4214 to accommodate Parallel Limb Bows, the 3i-4214-PL. The 3i-4214-PL MIL-STD Injection Molded Parallel Limb Bow Case has four (4) SKB patented trigger latches, four reinforced padlock locations, cushioned snap down handles on three (3) sides and recessed, in-line skate style wheels, transporting your gear around the world is both worry and trouble free. The interior of the 3i-4214-PL MIL-STD Injection Molded Parallel Limb case features a custom foam insert for secure positioning and cushioning of your gear. New state of the art water-jet cut foam arrow system that holds up to a dozen arrows is included. The 3i-4214-PL MIL-STD Injection Molded Parallel Limb Bow case has a uni-body design, which eliminates the need for excessive metal reinforcing hardware found on traditional flight cases. This case is under 20 lbs (empty)! The iSeries injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer resin and feature a gasketed, waterproof and dustproof, submersible design (IP67) that is resistant to corrosion and impact damage. The molded-in hinge with stainless steel hinge pins, patented “trigger release” latch system, comfortable, snap-down rubber over-molded cushion grip handles, secure stacking, and automatic ambient pressure equalization valve (MIL-STD-648C) all contribute to its military grade design.

Read more less

Description The SKB Cases Hunter Series 4117 Bow Case w/ Foam is designed to accommodate most of the best selling bows on the market with the quiver attached at an affordable price point. The SKB Cases Hunter Series 4117 Bow Case features a rigid shaped ABS shell with stylish embossing that actually adds structural support to the lid with an eight point interlocking stacking system. SKB's "Perfect-Match" valance bending system provides a tight and secure fit to prevent dirt, dust and moisture from the interior of the case with lockable draw-bolt metal latches and a comfortable carrying handle and weighs eleven pounds. The SKB Cases Hunter Series Bow Case w/ Carrying Handle includes plush lined EPS inserts for maximum impact resistance and new state of the art water-jet cut polyethylene foam arrow system that will accommodate up to a dozen arrows.

Read more less

Description The SKB Cases Hybrid 3410 Recurve Bow Case w/ Foam is made up a rugged, weather resistant 600 Denier ballistic nylon exterior that has a soft yet rigid EPS construction to protect your arrows and accessories. The SKB Cases Hybrid 3410 Recurve Bow Case features a custom foam insert to accommodate the most popular single take-down recurve risers and one set of limbs. The SKB Cases Hybrid 3410 Recurve Arrow Holder Case has a Plush-lined interior and comes with a one year warranty.

Read more less

Description The Hoyt Hunter Series Bow Case from SKB is designed to accommodate most bows as well as bows with an attached quiver, including the Hoyt Alpha Max, the Hoyt Power Hawk, and many others.. The case features a rigid shaped ABS shell with embossing, which adds structural support to the lid, and an eight point interlocking stacking system. The case is built with SKB's Perfect-Match valance bending system for a tight and secure fit that prevents the ingress of dirt, dust and moisture from the interior of the case. Attached to the valance are lockable draw-bolt metal latches and a comfortable carrying handle. Plush lined EPS inserts provide maximum impact resistance and the water-jet cut polyethylene foam arrow system can accommodate up to a dozen arrows.

Read more less

Description The SKB Cases iSeries 3614-PL Parallel Limb Bow Case w/ Foam and Wheels offers maximum protection for parallel limb bows. This SKB Cases iSeries 3614 Parallel Limb Waterproof Bow Case w/ Foam & Wheels features a custom foam insert for secure positioning and cushioning of your gear. The SKB Cases iSeries 3614 Parallel Limb Bow Case includes new state of the art water-jet cut foam arrow system that holds up to a dozen arrows is included.

Read more less

Description Cases are molded from ultra-high molecular weight polyethylene so they are extremely durable and lightweight. Color runs throughout the material so scratches are almost invisible. Molded bumpers absorb shock and protect exposed hardware. The case comes with industrial strength latches and will fit one bow and 1 dozen arrows. Designed to accommodate most of today's best selling bows with the quiver attached, this is the perfect bow case for nearly any bowhunter. This case will hold parallel limb bow and conventional swept back limb design bows that are up to 39" in overall length. This case meets ATA rated Specification 300, Category 1. Covered by a lifetime factory warranty.

Read more less

Description The iSeries TenPoint Breakdown Crossbow Case is an injected molded watertight case with wheels that allows the shooter to break down their crossbow and travel without the bulkiness of a traditional crossbow case. The interior features a heavy-duty 2 lb. density closed-cell, recyclable foam that has custom cut cavities with velcro straps to securely hold your limbs and buttstock. The buttock cavity has adjustable pull out plugs to accommodate lengths up to 32.5 Inch. The limb cavity, located in the lid, accommodates limbs up to 24.5 Inch wide. The quiver cavity holds your quiver and bolts up to 24 Inch in length. Also included is a clear, plastic box to hold all your tools and accessories. This box is also located in the lid and held in place with a velcro strap. This case accommodates the following TenPoint models: Vapor, Venom, Stealth FX4, Stealth SS, Shadow Ultra Lite, Turbo XLTII and Titan Extreme. It also accommodates the following Wicked Ridge models: Invader, Ranger and Warrior as well as Horton Legend.

Read more less

The iSeries Small Parallel Limb Bow Case fits parallel limb bows up to 34.5" long and includes separate quiver, arrow, and accessory box compartments (sold separately – Part# 3i-0702-1B). SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H). Prop65 Information This product can expose you to chemicals including carbon black, which is known to the State of California to cause cancer and birth defects or other reproductive harm. To understand why we must make this statement please click on the Prop 65 tab above. For more information on Prop 65, go to www.P65Warnings.ca.gov.

Read more less