SKB

The iSeries 3019-12 Mission Sub-1 Crossbow Case is an injection molded, watertight case featuring a custom cut high density foam to fit a Sub-1 Crossbow, quiver, and accessories ( 3 cavities), along with wheels and a tow handle for easy transport. Also compatible with Mission Sub-1 XR and Sub-1 Lite. SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, patented trigger release latches, snap-down rubber over-molded cushion grip handle, and resistance to UV, solvents, corrosion.

Read more less

Description The SKB iSeries TenPoint Vapor RS470 Crossbow Case is specifically designed to hold the TenPoint crossbow with a scope plus accessories in the main insert portion and a quiver loaded with bolts in the lid. Made of high-strength polypropylene copolymer resin, the case is impact-resistant and built with low-profile wheels. It has a telescoping handle, so you can pull it behind you. If you need more freedom of movement, there are comfortable overmolded handles on three sides for hand carrying. Design features include gasket sealing that makes the case dust and waterproof, a molded-in hinge for added strength, six stainless steel reinforced padlock holes, and six trigger release latches that compress the O-ring and seal the case tight. The case is resistant to a variety of hazards that you may encounter, such as ultraviolet (UV) radiation, chemical solvents, corrosion, and even fungi. A pressure relief valve comes into play during air transport by regulating the internal pressure, keeping your gear and the case from getting crushed and allowing you to open the case without having to break a tough pressurized seal that could otherwise develop.

Read more less

Description The SKB iSeries TenPoint Vengent S440 / Viper S400 Crossbow Case is specifically designed to hold the TenPoint crossbow with a scope plus accessories in the main insert portion and a quiver loaded with bolts in the lid. Made of high-strength polypropylene copolymer resin, the case is impact-resistant and built with low-profile wheels. It has a telescoping handle, so you can pull it behind you. If you need more freedom of movement, there are comfortable overmolded handles on three sides for hand carrying. Design features include gasket sealing that makes the case dust and waterproof, a molded-in hinge for added strength, six stainless steel reinforced padlock holes, and six trigger release latches that compress the O-ring and seal the case tight. The case is resistant to a variety of hazards that you may encounter, such as ultraviolet (UV) radiation, chemical solvents, corrosion, and even fungi. A pressure relief valve comes into play during air transport by regulating the internal pressure, keeping your gear and the case from getting crushed and allowing you to open the case without having to break a tough pressurized seal that could otherwise develop.

Read more less

Description Keep up to four broadheads safe from dirt, dust, and moisture with the olive-drab green iSeries 0702-1 Waterproof Broadhead Case from SKB. This case features polypropylene copolymer resin construction and provides MIL-C-4150J and MIL-STD-810F protection. Users will appreciate the custom cutout interior foam, molded-in hinge, and latch closure. Carry the case by hand or with the end hook.

Read more less

Description En route to your next hunt or competition, the SKB Bow Traveler Case lets you bring one piece of luggage instead of two. This 42 x 20 x 13" case has a padded, rigid lower compartment for your bow with securing straps and five handy accessory pockets, and an upper compartment for clothes and essentials. Heavy-duty wheels make it easy to roll the case through the airport and padded handles allow for a secure and comfortable grip. Black rail guards protect the case from the bumping and jostling of travel and there's a pocket for an ID. Despite its rugged construction, the case weighs just 13 pounds.

Read more less

Description The interior of the SKB Cases iSeries 5014 Double Bow Case 3i-5014-DB-M measures 50" L x 13.5" W x 6" D and features a bunk-bed storage system with rigid foam dividers to provide separate compartments with convoluted foam in the lid for stable positioning of two bows or a bow/rifle combination. The SKB Cases Double Bow Archery Case has four (4) SKB Cases patented trigger latches, four reinforced padlock locations that will accommodate a customer supplied lock and in-line skate style wheels so transporting your gear around the world or in the back of your truck is worry and trouble free. SKB's iSeries of injection molded watertight cases are constructed of ultra high-strength polypropylene copolymer resin and feature a gasketed, waterproof and dustproof, submersible design (IP67) that is resistant to corrosion and impact damage. The molded-in hinge and stainless steel hinge pins, patented "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handles on three sides, secure stacking, and an automatic ambient pressure equalization valve (MIL-STD-648C) all contribute to the military grade design of the SKB Cases iSeries Double Bow Soft Archery Case.

Read more less

Description The iSeries Ravin R26 and R29 Crossbow Case has been designed specifically to fit the Ravin R26, R29, R29X, and R29X Sniper Package. Featuring watertight, dustproof, military-grade construction, this iSeries case was built to meet all the demands and specifications of the US Military and is the perfect solution to protect your valuable crossbow investment. Indeed, SKB Cases was recently named as the official case and gun protector of the US Olympic Shooting Team in recognition of SKB's superior quality, craftsmanship, and gear protection. Features: Interior Dimensions: 30.00" L x 19.50" W x 12.00" D Color & Interior: Black / Custom

Read more less

Description Meant to be described as a great item for almost anyone, we're positive you are going to appreciate the SKB Cases MIL-STD Injection-Molded Recurve Bow Case - Single . Formulated working with several of the very most heavy duty and long lasting components around, these Bow Cases by SKB Cases will provide you with something that will give you a great deal of reliability. SKB Cases has been making top quality products for a number of years, and the SKB Cases MIL-STD Injection-Molded Recurve Bow Case - Single is their particular means of demonstrating just how much they care. Here at OpticsPlanet, we ensure that it is our obligation to purchase the best solution for all of your preferences, and exhibiting the SKB Cases MIL-STD Injection-Molded Recurve Bow Case - Single is a thing that we are happy to offer.

Read more less

Description Designed to convert from a single bow case with an accessory tray, to a double bow case with a bunk-bed style storage system, SKB's black 4719 iSeries Single/Double Bow Case features a rigid foam divider to form two separate compartments. The case can accommodate bows up to 46" long. It provides stable positioning for instruments, and convoluted foam in the lid adds extra cushioning and stability. This case is built to MIL Spec standards including MIL-C-4150J: waterproof and dust tight; MIL-STD-810FA: resistance to UV, solvents, corrosion, fungus; and MIL-STD-810F: resistance to impact damage. The MIL-STD-648C automatic pressure equalization valve maintains the case's waterproof and dustproof rating while equalizing the interior pressure to the ambient outside pressure to make it easier to open the case after commercial air travel.The injection molded case is constructed of polypropylene copolymer resin and is IP67-rated dustproof and waterpoof, and submersible. It features molded-in hinges, stainless-steel hinge pins, eight patented trigger-release latches, and six reinforced padlock locations. Three comfortable rubber over-molded cushion grip handles snap into vertical/horizontal position for convenient carrying, and features in-line skate-style wheels for easy transporting. Multiple cases stack securely for easier and efficient storage. The case is made in the USA.

Read more less

Description This black SKB Hoyt 4214 Parallel Limb Bow Case provides up to 40.0" x 14.5" x 5.0" of capacity and is designed to protect its contents from impacts, moisture, dirt, or corrosion. Low-profile, built-in wheels and three large, ergonomic handles allow for easy movement and carry. Utilizing a polypropylene, rubber, and stainless steel construction, the SKB Hoyt 4214 Parallel Limb Bow Case is IP67 and MIL-STD-648C compliant. When closed, this bow case's interior is fully sealed from dust, as well as water from 5.9" to 3.3' deep, while providing long-lasting resistance to wear and tear. Features Built to military standards Quiver compartment Accessory box compartments for i-series 0702-1 cases Waterjet cut foam arrow system (up to a dozen arrows) In-line skate style wheels for easy transport Trigger release latch system (can be retrofitted with TSA accepted key locking latches) Padlock holes include stainless steel padlock protector clips Snap-down cushion grip handles on three sides for comfortable lifting and carrying Waterproof and dust tight design (MIL-STD 810G) Molded-in hinge for added protection Ambient pressure equalization valve (MIL-STD 810G) Resistant to UV, solvents, corrosion, fungus (MIL-STD 810G) Resistant to impact damage (MIL-STD 810G) Lifetime warranty $1500 content coverage Proudly made in the U.S.A

Read more less

Description The SKB Cases iSeries 5014 Parallel Limb Bow Case will provide immediate shelter from sun, wind and even rain. This bow case manufactured by the professionals at SKB Cases features four (4) SKB patented trigger latches, four reinforced padlock locations, cushioned snap down handles on three (3) sides and recessed, in-line skate style wheels. The interior of the SKB Cases iSeries 5014 Parallel Limb Impact-resistant Bow Case a custom foam insert and repositionable tie-downs for secure fit and cushioning of bows. The SKB Cases iSeries 5014 Parallel Limb Waterproof Bow Case ensures that transporting your bows around the world is both worry and trouble free.

Read more less

Description The OD green iSeries 4214 Parallel-Limb Bow Case is designed to hold most medium-sized parallel-limb style bows. This impact-resistant case is made from injection-molded polypropylene copolymer resin to be resistant to UV radiation, solvents, corrosion, and fungi according to MIL-STD-810F standards It is gasket-sealed to make it dust and waterproof. Molded-in hinges, patented trigger release latches, and padlock holes with stainless steel protector clips add to the security of the case. Cushion grip handles on three sides for comfortable lifting and carrying, and in-line skate-style wheels on the side allow it to be pulled along the ground when the case is packed.

Read more less

Description Exterior Dimension (L x W x H): 45" x 17" x 6.25" Interior Dimensions (L x W x H): 39.75" x 13" x 3.75" Product Weight: 18.67 Lbs. The 3i-4214-PL MIL-STD Injection Molded Parallel Limb Bow case features a completly custom foam insert for secure positioning and cushioning of your bow and a waterjet cut foam arrow system for up to 12 arrows. To maximize the benefits of their latest size of MIL-STD Injection Molded Watertight cases, SKB has developed new interiors for the newest 3i Series case, the 3i-4214 to accommodate Parallel Limb Bows, the 3i-4214-PL. The 3i-4214-PL MIL-STD Injection Molded Parallel Limb Bow Case has four (4) SKB patented trigger latches, four reinforced padlock locations, cushioned snap down handles on three (3) sides and recessed, in-line skate style wheels, transporting your gear around the world is both worry and trouble free. The interior of the 3i-4214-PL MIL-STD Injection Molded Parallel Limb case features a custom foam insert for secure positioning and cushioning of your gear. New state of the art water-jet cut foam arrow system that holds up to a dozen arrows is included. The 3i-4214-PL MIL-STD Injection Molded Parallel Limb Bow case has a uni-body design, which eliminates the need for excessive metal reinforcing hardware found on traditional flight cases. This case is under 20 lbs (empty)! The iSeries injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer resin and feature a gasketed, waterproof and dustproof, submersible design (IP67) that is resistant to corrosion and impact damage. The molded-in hinge with stainless steel hinge pins, patented “trigger release” latch system, comfortable, snap-down rubber over-molded cushion grip handles, secure stacking, and automatic ambient pressure equalization valve (MIL-STD-648C) all contribute to its military grade design.

Read more less

Description The SKB Cases Hunter Series 4117 Bow Case w/ Foam is designed to accommodate most of the best selling bows on the market with the quiver attached at an affordable price point. The SKB Cases Hunter Series 4117 Bow Case features a rigid shaped ABS shell with stylish embossing that actually adds structural support to the lid with an eight point interlocking stacking system. SKB's "Perfect-Match" valance bending system provides a tight and secure fit to prevent dirt, dust and moisture from the interior of the case with lockable draw-bolt metal latches and a comfortable carrying handle and weighs eleven pounds. The SKB Cases Hunter Series Bow Case w/ Carrying Handle includes plush lined EPS inserts for maximum impact resistance and new state of the art water-jet cut polyethylene foam arrow system that will accommodate up to a dozen arrows.

Read more less